Gas property of constant motion disassociates h2 in opposition to changes in casimir force

   I recently updated  Relativistic interpretation of Casimir Effect  which establishes the foudation I expand upon here. My premise is that a relativistic  interpretation leads to the  common underlying environment which is exploited in claims of excess heat by Rossi, Mills, Arata, Haisch, Moddel,

Moller and others going all the way back to Langmuir and his discovery of anomalous heat when welding with hydrogen gas and tungsten electrodes in the 1920′s. These researchers may employ different methods of extracting energy which could even lead to otherwise unfavorable nuclear reactions but it is my position that the initial energy extraction depends upon  naturally occurring Heisenberg traps where the constant motion of confined gases with respect to changing Casimir geometry causes changes in energy density. There is one method proposed by Haisch and Moddel that circulates noble gases relative to intentional changes in Casimir geometry that exploits a tiny energy gain based on mechanism they refer to as “Lamb Pinch”. The Haisch and Moddel prototype builds Casimir tunnels segregated by insulation layers to create a synthetic skeletal catalyst. Other claims of anomalous heat are typically based on hydrogen or deuterium and run the gambit from chemical to nuclear either alone or in combination  with other mechanisms. My premise for initial energy gain with heated hydrogen gas is that the phenomena we refer to as catalytic disassociation is powered by the constant motion of gas which is in itself a macro example of ZPE based on HUP. The chaotic and random nature of this motion is normally considered un-exploitable however, IMHO, conditions where energy density is caused to vary are not normal and do provide an opportunity to exploit this motion! Normally we know energy density only changes as you ascend or descend by slow gradients through a gravitational well. At the nano scale however we know through Cavity QED that the isotropy of gravity can be suddenly broken by Casimir boundaries. It is easy to see at the macro scale how one could easily gain energy if we had free transportation like gas atoms that transported us between regions with different gravitational levels. We could simply lift items in low gravity and drop them in high gravity, but of course we don’t have free transportation at the macro scale. At the nano scale we know gas atoms can be disassociated at much lower than normal temperatures  due to catalysts of Casimir geometry like the skeletal catalyst Rayney nickel used in the Black Light process. It is my premise that molecular gases such as hydrogen oppose these sudden changes in energy density caused by changes in Casimir geometry (referred to as catalytic disassociation) while atomic gases such as h1 are unaffected, explaining molecular disassociation at lower temperatures. This asymmetry between atomic/h1 and molecular/h2 bond states is the basis for a Heisenberg trap – the chemical equivalent of lifting and dropping weights in different gravitational zones, only here, the transportation between zones really is free due to the gas property of constant motion. You still need to initially invest enough heat energy such that the disassociation threshold is within range to be triggered by opposition to change in vacuum energy density. This effectively discounts the heat energy needed to disassociate the molecule but when these atoms reform a molecule the help provided by the constant motion of gas to disassociate  molecules does not have a mirror property opposing molecular formation !  The process is not conservative – the opposition to molecular motion discounts the energy associated with molecular disassociation but the energy associated with molecular formation is not affected. The energy released by molecular formation also warms the cavity, thus further reducing our need to add heat on each subsequent cycle. The problem is that as heat builds more and more of the gas population remains disassociated only falling very slowly below the heat threshold to reform molecules ( a kind of self limiting slow over unity). Since we are essentially returning merchandise that we bought at discount for full price we need to accelerate this endless cycle between h1 and h2 WRT the threshold in order to extract any meaningful energy. The Ross E-Catalyzer is thought to accomplish this by extracting the heat with a massive cooling loop to pull the gas population temperature just under the disassociation threshold while using a PWM current pulse delivered into the nickel powder to then drive as much gas as possible back over the disassociation threshold. It remains controversial whether the resistive heating of the E-cat is fast enough to contribute at this speed or if the field generated by the current directly effects the Casimir geometry of the nano powders through magnetostriction to disassociate molecules during the pulsed on time that will cool and  reform molecules during the off time. A kind of sweet spot must be balanced between heat extraction that maximizes the number of ”still warm” molecules available for disassociation and the number of these molecules that can be disassociated by PWM current to the resistive heaters during the  ”on” portion of the heater waveform.                                                                 

 It seems counter-intuitive but instead of just throttling back this type of reaction we MUST remove heat, not only to store the energy gain but we have to cool the disassociated atoms enough that nature takes over and they reform molecules allowing us to repeat the cycle over and over again. The random motion of gas relative  to Casimir geometry changes the energy density being experienced by the gas molecules. Atoms are simply reoriented by this change in energy density  but those atoms sharing covalent bonds (molecules)  are held in the same orientation they posessed when the molecule formed by the covalent bond. This ”pressure” the covalent bond feels when energy density changes discounts the energy needed to disassoiate the molecule such that it can occur at a much lower temperature - when these atoms later re-form a new molecule they release the full energy associated with hydrogen atoms dropping to the lower molecular energy state including even the energy contributed in the previous cycle from the combination of gas motion and change in energy density. We are getting a full refund for a discounted purchase.

The Relativistic interpretation of Casimir effect proposes that the reduction in vacuum energy density between Casimir plates exactly mirrors the relativistic effects we observe when energy density increases due to acceleration or gravity. We see the effect of increased energy density as slowing time  in the Twins Paradox where the dilation and contraction can only be determined by relative measure. I am proposing these properties are reflected when vacuum energy density is lowered such that time is accelerated – contraction remains absolute in either type of dilation but with spatial velocityDelta t' = frac{Delta t}{sqrt{1-v^2/c^2}}

you have a vector between space and time where velocity slowly reduces past .7C and the contraction appears along the dimension of travel. When energy density is instead reduced by the supression mechanism of Casimir geometry the rate of C is directly manipulated! you have no need for spatial displacement and the contraction is symetrical along the time axis, seeming to contract equally from any spatial axis. I think this accounts for many of the claimed forms of condensed gas such as hydrino , fractional hydrogen, deuterium ice and the like.  A mathematical relationship between the formula for Casimir force and time dilation due to velocity should allow us to solve for time dilation as a function of the plate Area “A” over plate seperation “a”^4 . I think Casimir geometry can be broken down into an array of equivalent accelerations and t’ based on the mass of h1 or h2 . Like Peng Chen at Cornell discovered with respect to nano tubes you need “changes” in geometry to create catalytic action – therefore the most  irregularities at the smallest Casimir geometry  makes the best catalyst by presenting the most dynamic array of  force levels. These rapid changes in equivalent acceleration are  hard to notice from our perspective outside the cavity where the atoms appear to become slower, smaller, condensed or “fractional”  to us using a microscope from our inertial frame.  

 I am only just starting the math – the equations below are notyet in the best forms for use - I am still seeking better forms but my premise is that there is a relationship between the Gamma and Casimir formula [ t' and A/a^4 ] and that gas reactants circulating between Casimir boundaries experience an array of t’ values – Always accelerated from our perspective  but more so and less so relative to changes in geometry. What we perceive as catalytic action from our perspective outside the Casimir boundaries are very real changes in acceleration vectors for gas inside the boundaries.

The Casimir force per unit area Fc / A for idealized, perfectly conducting plates with vacuum between them is

{F_c over A} = - frac{d}{da} frac{langle E rangle}{A} = -frac {hbar c pi^2} {240 a^4}

where

hbar (hbar, ħ) is the reduced Planck constant,
c is the speed of light,
a is the distance between the two plates.
————————————————————-
Time dilation due to spatial velocity
Delta t' = frac{Delta t}{sqrt{1-v^2/c^2}}
Print Friendly

Papps Noble Gas engine – a ZPE theory

francis
Sun, 27 Mar 2011 07:04:36 -0700

"The Mystery and Legacy of Joseph Papp's Noble Gas Engine"  by Eugene F.
Mallove http://www.infinite-energy.com/iemagazine/issue51/papp.html and an
April 2 article by Sterling D. Allan, with Hank Mills on the current
status titled Noble Gas Engine Ready for Production Investment are both similar
to the ZPE reaction that I am proposing.
The papp engine utilized a combustion chamber but not combustion to power his
engine.His engine instead generates plasma during the combustion phase to drive
the piston back up and cool the gases. there is no exhaust or fuel consumed -
the gas mixture is hermetically sealed in the chambers and oscillates between
expanded and contracted statesthrough an exotic configuration of Casimir
supression and gas law where ZPE repeatedly disassociates gas molecules to
 form plasma and heat the compressed gas.

I had previously assumed that noble gases would ONLY act as insulators helping to isolate
conductive/catalytic pockets of gas geometrym inside a combustion chamber similar
to the way Haisch and Moddel’s prototype has insulating layers between the active Casimir/catalytic layers to force the migrating gases to translate through a wide range of vacuum energy density (what Mills calls hydrino states but
others refer to as “fractional or relativistic orbital states) – Haisch and Moddel concentrated on the Lamb pinch with unheated noble gas while I suggest their environment could be utilized to force catalytic disassociation of diatomic gases like hydrogen. My premise being that any molecular gas opposes the translation to different vacuum energy densities while atomic gas translates freely creating an asymmetrical path. This concept would go unnoticed and unexploited on the macro scale since such changes only occur on a large scale as the result of a gravitational gradient where energy density increases as you travel deeper into a gravity well. At the nano scale however you have a break in this isotropy due to suppression induced by Casimir geometry. It is my position that change in this Casimir geometry is responsible for catalytic action. Unlike the increased energy density due to a gravity well we see decreased energy density due to suppression and it occurs abruptly at the plates/ walls of a Casimir cavity. These walls can take the form of a compressed meniscus in a liquid medium and should have a gaseous equivalent when different gases of different bonding affinities are rapidly mixed in a COMBUSTION chamber. After reading the article above it is clear there was no combustion occurring in the Papp engine as there was no exhaust. I humbly suggest this was an endless ZPE reaction that catalytically disassociated noble gas compounds – Wikipedia does list a limited number of chemical compounds that noble gases can form so it could act as both monatomic insulator and reactant compound. Once disassociated the atomic gases translate freely to the current vacuum energy density and are then free to reform their chemical compounds at the local energy density and release energy as they reform compounds and fall to the lower energy state. The catalytic disassociation replenishes the atomic energy state each time courtesy of ZPE. The heat released by this process would be self limiting since it pushes the piston back up to both cool the plasma and release the pressure causing these bubble like pockets of Casimir geometry. I think the spark mechanism may have been more to keep the mechanical timing and crank direction under control or you would get frequent reversals and possible explosions and so you would want to run it just below threshold and use the spark to delay the reaction past top dead center – I think a multiple cylinder engine would have been much safer.RegardsFran

On Sat, 26 Mar 2011 15:44 Robin wrote 

Don't forget that there is likely to be a fair bit of free Hydrogen in a

normal IC engine running on gasoline, which after all is a "Hydro"-carbon.

So if H is anywhere near a reasonable catalyst, then we are likely already

seeing Hydrino energy in normal combustion engines.  

also Note that several noble gasses (He, Ar, Ne, perhaps Xe) also act
as Mills catalysts.
------------------------------------------------
reply to Robin

Yes hydrino combustion probably is occurring inside a normal ICE to a
limited degree
but I am still convinced that oxygen is the bane of this reaction.
Combustion is a one
way reaction that removes the hydrogen. If the plasma can be oxygen starved
the fractional/ hydrino
states can Continue to expand over a wider range. I think a diesel like
heater in the ICE could
bring a noncombustible mix of hydrogen and other gases up close to the
threshold of a runaway ZPE reaction and then the piston stroke would act
like the PWM in the Rossi device to compress the plasma over the threshold
in one direction then reverses to expand and cool the plasma back under the
threshold. My posit of an endless ashless reaction is based on a super
catalytic disassociation where nano geometry pockets of catalyst gas oppose
and disassociate molecular hydrogen or hydrinos - I don't think the
fractional states would be as acute as in a solid skeletal cat or nano
powders but there is no danger of damaging the geometry since they are
constantly reforming in a gas medium similar to bubbles in the liquid medium
of bubble fusion. IMHO the dihydrinos would disassociate/reform multiple
times giving off heat every time they reform to heat the gas and push the
piston back up.
Regards

Fran

RE: [Vo]:Papp engine

Jones Beene Mon, 28 Mar 2011 09:10:16 -0700
From: Fran Roarty 

[snip]“The Mystery and Legacy of Joseph Papp's Noble Gas Engine”
by Eugene F. Mallove
http://www.infinite-energy.com/iemagazine/issue51/papp.html
is a similar ZPE reaction to the one I am proposing.[/snip]
Since you mention this, Fran, let me add another thought - in which the
role of xenon oxide should be mentioned along with the Casimir repulsive
force. Gene’s fine article was a classic, yet it did not revive interest
in this engine among top level researchers - other than the four
different groups of people who had been associated with Papp, and who
had seen the engine working. Millions were spent by them but with no
reliable proof that the effect has been replicated. No theoretician
seems to have been able to find any conceivable way that it
could have worked.

All of the experts were probably hindered by one primary expectation.
 Since it was based on a converted piston engine, it had to be a heat
engine. Probably wrong! If today’s speculation is correct, then Papp’s
crazy design is not and never was a heat-engine, and in fact he may
have inadvertently found that ZPE can operate best as a heat sink.
Admittedly several other explanations for Papp have seemed partly
accurate in past analyses, but they assume that hydrogen was present,
 and there is no indication of that. Oxygen would be easier to imagine
as a contaminant, if it were not intentionally added. It is possible
that today’s proposed mechanism can operate best when physical
nano-cavities are present, but a gas plasma is also functional - since
so called “Casimir cooling” occurs in a medium via a Casimir repulsive
force, operating on curved surfaces where an inert molecule
like xenon might qualify as the active sphere for the cooling effect. 

We know for sure that xenon was one of Papp’s active gases, and that
xenon is known to have both chemical and nuclear metastability. I am
assuming, as Mallove did (and as the record shows), that Papp’s engine
 was demonstrated successfully on several occasions. I think we can
even identify the molecule that caused the Feynman-instigated explosion
 at the infamous demo – the one that cost Caltech a handsome sum and
cost one bystander his life… did we need to add a little extra drama
to this story?

Specifically, xenon tetroxide is a chemical compound of xenon and
oxygen: XeO4. It is remarkable for being a stable compound below −36 °C;
 but above that temperature it becomes violently explosive. This
combination of properties is what you want for use as a ZPE or ZPED
“cold pump” since you can possibly get anomalous shock waves by
capitalizing on the “cold side”, and at low effective
temperature (due to Boyles law). You can call it “reusable TNT” but it is
another version of the “entropic explosion” (shock wave without heat)
which has been referred to here before. It would be an ideal way to
 “pump” ZPE.

http://www.mail-archive.com/vortex-l@eskimo.com/msg15977.html

How to cycle between temperature extremes then becomes the overriding issue
with a piston engine. Fortunately every piston engine is also a vacuum pump in
disguise. You may need extra cooling of the cylinder head to keep it at ambient
or below and the engine will run cold naturally. There is a partial vacuum fill
of gases, and a high compression ratio to invoked the heat-pump effect and then
Joule-Thomson takes care of the rest. At bottom dead center of the stroke you
have a cold plasma from a shock wave which has dissipated without a heat
signature.

The electron configuration of xenon in its metastable chemical state consists
of tightly bound core electrons with a missing electron in the 5P shell, and a
loosely bound valence electron in the 6S shell. Thus it will lase under proper
conditions. It is tempting to attempt to connect orbital photon pumping
(lasing) with ZPE pumping – and in a few elements this could happen, but I can
find no authoritative source for that proposition.

Additionally it can be noted that the “xenon excimer laser” typically uses a
combination of a noble gases with a reactive oxidant like fluorine. Under the
appropriate conditions, a “pseudo-molecule” called an “excimer” is created,
which can only exist in an energized state and produces coherent light in the
ultraviolet range on collapse. Normally this is conservative and lossy but this
is only a metaphor for an inverse process. In the Papp engine, even if xenon
does not oxidize all the way to the tetroxide, it could easily form an excimer
when rapidly cooled from a previous shock wave.

The employment of oxygen instead of fluorine can make something happen under
extremely cold transitory conditions, as with Joule-Thomson expansion
(throttling) in a cold plasma. A design which provides mechanical torque can
depend on a shock wave in the absence of temperature differential, due to this
little known property (little known, unless you design automotive air-bags or
read vortex). This mechanism is known as the “entropic explosion” – or heatless
shock wave. Essentially, this converts “coldness” into torque, and then into
usable energy, in a proper design. :-) 

With a high compression ratio, it could be possible to cycle a low pressure gas
fill between ambient and minus 36 °C, on every single revolution of the engine
- so long as an adiabatic process is avoided.  But by permitting Boyle’s Law to
operate using a mix of gases with one of them being helium, thermodynamic
expectations become altered, and so my suggestion today is that this is the way
Papp avoided the adiabatic process. 

These thermodynamics, if this speculation is accurate, would have been
completely unknown to Papp, and maybe to Feynman, but the engine worked (at
least it worked on occasion when curious onlookers from Caltech were not
tempted to unplug the temperature control unit). Aside from that, relevant
details are still unknown and that probably goes back to the fact that Papp,
like Andrea Rossi, could have gotten lucky in the lab and not had a clue about
what they had found, due to paranoia at having the invention stolen. 

BTW I’m referring to the strange “inversion temperature” of helium once again
in the above scenario, since of all exploitable physical properties, it seems
to be the one which can be tied directly to the zero point field.

Think about an ‘alternative universe’ in which the great Feynman really was
great (instead of above-average) and in which there was no OPEC, no Gulf Wars
and no trillion dollar deficits, due to the discovery 40 years ago - of a brand
new energy source. IOW a real genius was present at this demo who was able to
override natural skepticism and figure this one out from the start.

Ironically, the rights to the Papp engine could probably have been purchased by
Caltech for less than had to pay for the fatality. 

Jones
Print Friendly

The ZPED theory of quasi-nuclear gain (long post)

The ZPED theory below by Jones Beene lends support to my own relativistic solution for the recent claims of  energy amplification by Italian researchers Rossi and Foccardi. the theory is only recently introduced on the vortex-l forumn.  http://www.mail-archive.com/vortex-l@eskimo.com/msg43780.html

Although I agree with most of what Jones Beene writes below my position is that many of the non nuclear or hybrid theories like Mills’, Rossi or Haisch – Moddel depend on an ashless reaction as the predominant source of energy. Many contend that energy extraction from ZPE  violates the  first law of thermodynamics but this is because the first law assumes ZPE is too chaotic to be exploited. These claims of anomalous heat, IMHO, represent an interim ashless -ZPE- step to any of the nuclear paths being proposed. What Puthoff and others refer to as vacuum engineering or vacuum energy suppression provides a loophole to this assumption upon which a Heisenberg trap could be based.  The amount of ash seen in these experiments does not seem to be in keeping with the amount of energy released. The theory Jones presents below is itself a hybrid between nuclear and Zero Point energy where decay is “enhanced” by change in energy density / supression. this theory still results in an exchange of mass for energy in a manner which I completely agree with but still remain convinced that energy can also be directly harvested from zero point energy without decay or conversion of mass. I am alone in seeing a connection between spontaneous emission, pyrophoricity and radioactivity, Although the first two are not radioactive I propose that they are all a result of energy balancing  between a Puthoof atomic model ground state and vacuum energy density. Rapid changes in energy density are associated with catalytic action (pores in skeletal catalysts and nano powders) , spontaneous emission of photons and anomalous half life decays (cavity supression). My point is that these imbalances don’t have to result in radioactive decay but rather the ground state could alter the energy density or propell the atom between different densities given the proper environment (nano powder or skeletal cat) .

ZPED theory of quasi-nuclear gain (long post) Jones Beene
Sat, 19 Mar 2011 11:37:47 -0700

This concept has "a new kind of chain reaction" at the heart of a
complicated theory known as ZPED - zero point enhanced decay. Several
related old posts have been revised and included here for convenience.

Many observers have become increasingly open to the suggestion that what
Andrea Rossi has discovered, serendipitously and possibly unknown to
himself, can be characterized as a critical mass. "of something" operating
for large non-chemical gain, with mild radioactivity. Obviously, the
'something' is not directly related to nuclear fission, since neutrons are
absent. 

The most puzzling detail is the lack of sufficient radioactivity to account
for the excess heat. However, energy from nuclear decay or isomeric
transition (IT) can be involved at a secondary level, if most of it can be
coupled to an exchange mechanism with the zero point field. This overall
modality is related to a physical mass of reactants, but it could easily be
leaning towards having additional intangible considerations - which casts
everything into a different light. 

Rather than change the well-known phrase 'critical mass' to the more
precise: 'critical accumulation' (in order to accommodate intangible
considerations) it seems prudent merely to acknowledge that this process is
not directly connected to standard uranium fission, except metaphorically;
but it does demand threshold levels of at least one variable and possibly
several.

The important behavior of the underlying system becomes "emergent" - in the
way Ball describes in Critical Mass - How one thing leads to another, which
is online at Google Books. This does not delve deeply enough into quantum
mechanics to be helpful in the precise pursuit (explaining Andrea Rossi's
E-Cat discovery). However, the insight on emergent systems is helpful for
those who do not appreciate how a large jump in gain can arrive in such a
surprising way. The irony here is that QM and critical mass are antithetical
on one level of understanding - the small juxtaposed to the large.

One intangible consideration in the operation of any quantum mechanical
process is that 'probability' itself, in the sense of 'correlation fields,'
is responsive to accumulation - and/or to 'trigger' levels (leading to
emergent behavior) in systems which depend on a flux of
neutrons-substitutes, which will be called a "vector". A moderately high
stable temperature is one such trigger or vector, which operates to maximize
stress within nanocavities.

'Probability' is also found at the underlying level of 'critical mass' via
neutron interaction (fission chain reaction), but in this new form it is
related to the zero point field in two steps. There is a secondary,
accelerated nuclear decay (an isomeric conversion or a weak force reaction)
which can seem at first to be primary, without looking at all the clues. 

This process is mediated by a dense form of hydrogen known as 'pycno'. This
hypothesis is the merger of QM, cavity QED, and Casimir mechanics with
mainstream nuclear reactions, and it will lead to a theory called ZPED, or
zero point enhanced decay. The ultimate energy source is the atomic nucleus.
Let's make that clear, even though the way it arrives is not straightforward
and involves quantum mechanics, time shifting, and two distinct stages. Here
are specific details:

There is an unusual subset of heavy elements - four elements in the periodic
table which are heavier (in a.m.u.) than the next element above them in the
table. For instance, element 92 is heavier than element 93. There appears to
be only four such elements in this category.

As you might imagine (even not knowing the identity of the four) this
characteristic could be strongly indicative of nuclear instability. The
first three are quite well-known as the elements involved in nuclear
fission: thorium, uranium and plutonium. 

The 'nuclear fission' common denominator of these elements is a "too-heavy"
atomic mass, comparatively, and this property might indicate that the fourth
element in this grouping is heavy enough to have its decay rate altered.
However, this lesser known element is not known to undergo fission via
neutron capture, as are the three above - and it does not participate in a
chain reaction. At least not a chain reaction which is vectored by neutrons.
It is also the lightest of the four. It is also a singularity in having the
highest spread of atomic weight between its lowest and highest stable
isotope of any element. 

Does that make it special in any way for a new kind of nuclear reaction, not
involving neutrons as the active modality, but possibly involving another
vector such as "pycno", f/H or IRH (inverted Rydberg hydrogen) or other
names which were once more closely identified with the Mills' hydrino?

This fourth element is tellurium - element 52. It is best known in the
compound bismuth-telluride, used in thermoelectrics, or cadmium telluride in
photovoltaics. It is photoactive and tends to form into 2D layers in a way
that seems to mirror the dense hydrogen state - pycno which is also 2D.
"Topologically protected surface states" are the important 2D feature of
bismuth telluride. In the presence of spillover hydrogen, this points
directly towards the critical operative mechanism of the E-Cat device.
To help in understanding how "topologically protected surface states" might
relate to a new kind of sequential nuclear reaction of tellurium, it can be
helpful to start with the information on:
http://en.wikipedia.org/wiki/Topological_insulator
A topological insulator is a material that behaves as an thermal insulator
in its interior while permitting the movement of charges on its boundary. In
fact bismuth-telluride conducts electricity like a metal but conducts heat
poorly - like glass for instance. The internal stress resulting for this
contradictory set of physical properties on bulk bismuth telluride must be
severe. This will create nano-cracking and cavity formation.
On the surface of a topological insulator are special states which fall
within the bulk energy gap to allow good conduction. They also may allow
spillover hydrogen to accumulate via mirror charges and then further densify
in the nanocavities, which are more like nano-pits. Heat is retained in the
pit but not at the surface, providing a high stress-interface.
Once densified, there are many possibilities for excess heat. Those who
favor a nuclear-only pathway might look to the P-e-P reaction as the
aftermath. Some deuterium is expected in the ash. However, there are said to
be no detectable neutrons over background in the E-Cat, and there should be
neutrons with any significant level of fusion.
What is more likely, in my opinion is that the main initial source of heat
is NON-NUCLEAR. This creates an immediate local state of energy depletion,
which can the secondarily result in accelerated decay of a tellurium isotope
in such a way that that there is little remnant radioactivity. The most
likely isotope for this is Tellurium-125m, which should be responsive to
this kind of "balancing the books" scenario. Another unstable isotope -
previously mentioned is Zr-96, but bismuth telluride may best frame this
theory.
In either case, the "IT" kind of energy shedding may predominate. An
"isomeric transition" is a radioactive decay process that involves emission
of energy from a nucleus in a metastable state, referred to in an excited
state or deformed nucleus. There can be few traces of transmutation, when IT
operates to balance the energy withdrawn from the ZPF.
http://en.wikipedia.org/wiki/Isomeric_transition
I am pretty sure that zirconia is the corresponding active material in
Arata/Kitamura/Takahashi/etc experiments, yet only used small quantities and
with less grain. Rossi may have found a much better "catalyst" (which is of
course his inaccurate description) or else he has found a critical mass
level. In both cases the nano nickel or Ni-Pd alloy can serve as spillover
catalyst.
Rossi's one liter capacity reactor indicates that he could not be using more
than a kilogram of powdered material - and for present purposes, it is
assumed to be mostly bismuth telluride with a few grams of a spillover
catalyst. To be a little more specific, then, in this hypothesis which I am
calling ZPED (zero point enhanced decay), most of the extra thermal energy
initiates in the first step from a known asymmetric manipulation of hydrogen
- the Lamb shift operating at infrared frequencies with a GHz offset.
Any excess energy is severely self-limiting at a low level unless there is
provided an in situ way to replenish the zero point field. The replenishment
can comes from weak force reactions in tellurium (or other candidate nuclei)
and this effectively replaces the energy deficit. Most of the emitted gamma
radiation couples to ZPF before it can be observed in out 3-space.
Continuing operation "appears to be" nuclear, when in fact that
characterization is not accurate, and the proximate cause in zero point,
while the ultimate cause is nuclear.
This mechanism happens in two steps beginning with an asymmetrical looping
effect of QED - quantum electrodynamics, and can be interpreted as the
influence of virtual photons from the ZPE which have been emitted and
re-absorbed by the densified hydrogen atoms. The value of the Lamb shift to
this explanation is by way of a tiny mass-energy equivalent, which is about
4^-6 eV = 1 GHz = 4^-23 joules which is not much to get excited about unless
you can recycle (pump) the change (asymmetry) rapidly. With your oscillator
in the terahertz range (higher than ambient - i.e. the 'trigger'
temperature) then the slight thermal gain can be made additive and
sequential, so long as the zero point field is continually replenished
locally.
The bottom line of the ZPED thesis is that the initial (non-nuclear) gain is
via QM effects and the zero point field (the Lamb shift and/or relativistic
acceleration) - in conjunction with the rapid IR (infrared) pumping
mechanism at a thermal trigger temperature. This creates a local energy
deficit - in which an unstable nucleus, like Te-125 or Zr-96 become far more
susceptible to decay, and can effectively 'regauge' the depleted local
field, while leaving some (but comparatively little) remnant radioactivity.
As for moving this from paper to laboratory, a set of definitive experiments
has been (is being) designed to falsify this theory.
-----Reply to jones -----
From: Roarty, Francis X 

Although I agree with most if not all of the proposed ZPED theory my
position is that many of the non nuclear or hybrid theories like Mills',
Rossi or Haisch - Moddel depend on an ashless reaction powered directly from
ZPE as the predominant source of energy. Many contend that any energy
extraction from ZPE violates the first law of thermodynamics but this is
because the first law assumes ZPE is too chaotic to be exploited (Apparently
true in an isotropic energy density but not confirmed when said isotropy is
broken into gradients). Many of the claims of anomalous heat all seem to
occur when this isotropy is broken and, IMHO, represent an interim ashless
reaction. The reaction can be a chemical or physical asymmetry such that the
gas atoms are modified in some way before returning to a particular energy
density - the asymmetry even opposes this return and it is left for ZPE to
overcome this opposition. Reifenschweiler effect may reflect how ZPE
manipulates Space-Time to satisfy this asymmetry in restoring an orbital to
ground state by dilating time.

What Puthoff and others refer to as vacuum engineering or, vacuum energy
suppression, provides a loophole to this assumed violation of COE upon which
a Heisenberg trap could be based.  The amount of ash seen in these
experiments does not seem to be in keeping with the amount of energy
released. The theory Jones presents is itself a hybrid between nuclear and
Zero Point energy where decay is "enhanced" by change in energy density /
supression. This theory still results in an exchange of mass for energy in a
manner which I completely agree with yet I still remain convinced that
energy can also be harvested directly (in exchange for time dilation) from
zero point energy without radioactive decay or conversion of mass. I am
alone in seeing a connection between spontaneous emission, pyrophoricity and
radioactivity, Although the first two are not radioactive I propose that
they are all a result of energy balancing  between a Puthoof atomic model
ground state and vacuum energy density. Rapid changes in energy density are
associated with catalytic action (pores in skeletal catalysts and nano
powders) , spontaneous emission of photons and anomalous half life decays
(cavity supression). My point is that these imbalances don't have to result
in radioactive decay but rather the ground state could interact with the
energy density to  be propelled through space and/or time as a result.
Regards
Fran
Reply from Jones:
Fran - I generally agree except the problem with Mills or Haisch/Moddel et
al. is that they make claims for the nickel hydrogen reaction alone, not
requiring a second stage nuclear 'makeup' reaction - but the claims cannot
be verified by others. They probably can do it, but not robustly and perhaps
not for extended periods.

Until they can do it 'on demand', it seems reasonable to suggest that Rossi
is essentially doing a similar thing, yet he (inadvertently) provided a
pathway for nuclear gain, and that extra detail seems to have allowed him to
demonstrate a robust reaction in circumstances where others get mixed
results.

Mills has not asked me for advice but if he did, I would suggest adding an
active ingredient to his "solid fuel" reactor that does have this ZPED
pathway for accelerated decay. Same with Haisch/Moddel. 

The first thing to try is bismuth telluride, and the second is zirconia.
Either of these must be recycled with heat and pressure several times to
achieve nano-fracturing; but they probably do not need to be nanopowder at
the outset (hopefully). It is that simple (almost).

This setup might also require a nuclear trigger like thorium. 

Can you interest Moddel in trying this? It could be as simple as adding a
commercially obtained product to an earlier experiment.

Jones

-----Reply from Robin -----
From: mix...@bigpond.com 

>How would the nucleus deform into the active isomer is the real question,
>and/or can the deformation be itself be exothermic so that there is a
>'double exotherm' all caused by the same stimulus ? There are too few
papers
>to base an informed opinion.

RvS - If so, it would be a violation of the first law of thermodynamics, so
it's not
very likely IMO.

Robin - 

----- Jones reply to Robin-----
No, no. Nuclear fission or fusion do not violate CoE for the simple reason

that mass is converted to energy. This is no different.
Induced gamma emission (IGE) or internal conversion (IT) are both solid
fact, not hypothetical. Mass is being converted to energy as in fission and
fusion. 

http://en.wikipedia.org/wiki/Induced_gamma_emission

The hypothetical part of it - especially as it might relate to the E-Cat via
the ZPED theory is that the gamma emission can be stimulated by a "deficit
in the zero point field", and that some (or most) of the induced emission
couples directly to the depleted field... and that isotope redistribution
reveals the ultimate mass deficit. 

That is not too big a stretch IMO. It does not violate CoE.

The few elements subject to so-called "isomer energy" are no different in
metastability than are the fission candidates Th, U or Pu - except the
excess mass "identity" is less clear; this is because the beginning and
ending element can be the same but not necessarily the isotope balance. I
have tried to find any study which connects IGE to isotope distribution
shifts, but if there are any - then they are classified.

"Isomer energy" itself is a newer field that was born out of top secret
military devices like the hafnium or tantalum (gamma) lasers, and especially
the UAV program. "What" the nature of the loss mass involved consists of, is
nebulous: Gluons? Pions? who knows? IOW - it is too early to say what kind
of mass is being converted, so one must simply consider this to be a
"subset" of IGE for now. (or else dismiss it as unproved).

For any CoE violation, one would need to show that no mass is being
converted, which is next to impossible with an element like tellurium that
has no many isotopes and isomers including the metastable Te-123, which it
is a most excellent candidate for any kind of isotope redistribution in the
conversion process.

If no mass is lost, then of course you are correct; but suffice it to say
that all of this hypothesis is on a fairly firm foundation due to IGE and
the undeniable billions that have gone into it from the USAF under the
blanket of the UAV programs. 

Best estimate is $12 billion since 2002 into UAV of which a quarter or more
of that figure has gone into isomer energy or IGE. That is new information I
got today from a reliable source, but it needs to be checked out. 

This kind of R&D focused on IGE/IT/IE etc could explain why there is such a
high level of "official indifference" at DoD to the E-Cat Rossi, which any
fool can see has enormous military significance. They are probably already
way ahead - and could have their own version of the E-Cat in an unmanned
drone, with an enormous range ready to fly if not in the air now. 

It would not surprise me if the USAF "borrowed" some of the technology
directly from Rossi a few years ago, come to think of it. The UAV program is
not just top priority. It is the crème-de-la-crème and certainly would be
expected to bring out all the spooks.

Jones

 

Print Friendly

Primary objection to relativistic interpretation of Casimir effect

The primary objection to a relativistic interpretation of Casimir effect and catalytic action is that the equation for Casimir force at  MINIMAL cavity width provides results which would seem insufficient to manifest the necessary time dilations to contract space time enough to suddenly make the longer vacuum flux capable of fitting between the interior walls of a Casimir cavity. The concept is akin to many SCIFI story lines where the interior volume of a room can be many time larger than the exterior volume. The concept of a MINIMAL cavity width for Casimir plates is based on plate geometry and the quantum accumulation of a field at some small distance paralell to the plate surface. This limit has been  established by Liftshitz and others but is based on our 3D perspective outside the cavity which my theory attempts to circumvent. I am positing that the 3D perspective inside the cavity is changed by vacuum energy suppression  that results in a  Lorentzian translation between space and time. The mini hydrogen, hydrino, or other anomalous forms of condensed hydrogen (take your pick) made famous in claims of excess heat would see the walls of the cavity shrink but an observer on the cavity wall would likewise see the hydrogen appear to shrink. This brings me to the crux of this issue which is, how can the equivalent acceleration inside the cavity be of such a large magnitude to achieve Lorentzian contraction and sidestep these limits of MINIMAL width and plate proximity constraints imposed by Liftshitz and others? A shortcut is needed that ignores the need for spatial velocity and directly manipulates time. We know that both acceleration and equivalent acceleration due to gravity can result in time dilation. Therefore I assume a relationship between vacuum energy density and time dilation. We see this in the twin paradox because acceleration to fractional C can be replaced by a stationary twin at the bottom of a High G gravity well such as a dead star through equivalent acceleration. time dilation would still accumulate even though both twins are spatially stationary.

 

First keep in mind that although Einstein’s relativity is more convenient, Lorentzian theory is equally valid, and a neo Lorentzia theory of an ether that intersects our 3d spatial plane at 90 degrees to all 3 spatial axis provides a better model for my posit. Normal Lorentzian contraction requires spatial velocity approaching luminal scale to become visible along the axis of observation and displacement. These large velocities are required because it is a Pythagorean relationship between the rate of intersection of this ether axis with our 3d spatial axis. A vehicle that approaches these velocities on a spatial vector is no longer on the same 3d axis line as a stationary observer but rather a trigonometric angle between the etheric and spatial axis reflected in Lorentzian contraction. Equivalent acceleration does not require any velocity at all. It can be considered an opposition to the intersection rate of the ether axis (note I don’t dare call this a velocity because this is normally a nonphysical axis that only manifests itself for the briefest instant when virtual particle pairs appear and disappear while intersecting our physical axis). A  nucleus will oppose this flow of virtual particles and results in stretching tiny relativistic wells in space time.  The orbital electron are not pushed as hard but are electrically tethered to the nucleus which they try to follow unto the well but can never catch  up. This is equivalent to Puthoff’s model of restoring energy to an electron orbital in an inverse fashion – I am positing that the intersection rate of vacuum fluctuations is opposed more by the condensed mass of the nucleus then the electrons which are left in a permanent state of being pulled along the time axis by their electrical tether. This opposition  of mass to the rate of intersection accumulates to our macro scale as gravity and in the case of high gravity planets or dead stars can accumulate time dilation quickly enough relative to our scale to be observable in experiments. Normally inertial frames reflect the slight differences to this opposition proportional to velocity or equivalent acceleration provided by a large mass.( We are never aware of time dilations in these different inertial frames because our physical world is scaled and propelled by the intersection of these axis- wheelworks of nature). In the case of Casimir geometry and suppression we have something novel that cannot possibly occur at the macro scale. We refer to the normal rate of opposition to the ether axis by mass as gravity but this is amplified by Casimir geometry utilizing  suppression to create a SEGREGATION of the intersection rate. The large exterior plates are able  to very rapidly accumulate a shallow reservoir of delayed vacuum flux  while inside the tiny cavity an equal quanity of vacuum flux are accelerated and concentrated into a permanent venturi.  The intersection rate of the ether with our 3d spatial axis becomes segregated, the isotropy is broken and you can have local variations in vacuum energy density without the normal square law displacement gradient of a gravity well. In this interpretation there is no overall net gain or loss to the segregation as DiFiore et all discovered in their experiments to measure change in gravitational forces with stacked cavities. The large surface area of Casimir plates would accumulate a shallow reservoir of somewhat higher energy density than would be accumulated by normal mass due to supression but the tiny volume of space inside the Casimir cavity would then concentrate said reservoir into a MUCH lower energy density venturi far below what we would consider the zero reference point of open space. This is another way to model the concept of “negative energy density” or what could be called a gravitational “Hill”. My analogy here is the ambient wind speed filling a ships sail can be far slower than the wind whistling through a small hole in the sail. If the hole is small enough to never deplete the reservoir in the sail you have an equivalent for Casimir plates and the cavity.

Note 2 things in the above paragraph regarding the primary objection to this theory. One, that equivalent acceleration is obviously not proportional to spatial velocity in regards to the intersection rate of vacuum flux with the spatial axis because aceleration is at a trigonmetric proportion of C while equivalent acceleration effects the rate of intersection directly, and two, that unlike the normal accumulation of vacuum energy density by mass demonstrated in a gravity well, the reduced energy density of a Casimir cavity represents a gravity hill. It is my posit that we are taking the normal intersection rate of this nonphysical  axis and segregating it into an amplified opposition on the plate surface and an equivalent amount of “negative” opposition concentrated inside the cavity
(no net change only redistribution). That “negative” opposition or acceleration is relative to a gravitational zero reference of open space. A Casimir plate – cavity system allows us to DIRECTLY  manipulate/segregate this rate of intersection with our 3d spatial axis based on geometry and QM.
My point being that the quantum effect of the plate atoms in Casimir effect not only causes an abrupt break in isotropy as proposed in “Cavity QED”  but that the resulting break is a segregation of energy densities allowing this intersecting nonphysical axis to flow at different rates through different zones while the net average remains unchanged. I think the seemingly inconsistent claims of both half life acceleration and delays in radioactive gases correctly  reflects the interactions with these opposite energy density zones and conforms to my model of shallow less notable increases in energy density spread over large plate surface areas while inside the cavity you have zones of GREATLY decreased energy density. Note the claims for half life acceleration were of significant increases while the claims for observed delay were far fewer and of much smaller magnitude. Different geometries of catalyst and radioactive gas would effect the population distribution of the radioactive gas exposed to plate surface vs cavities and would determine which gases qualify for time dilation and which zones they would occupy. Applying this theory to catalytic action is supported by a Cornell paper published last year that notes catalytic action only occurs at the openings and defects in a nano tube. I would submit that a large scale theoretically perfect Casimir plate assembly would have little catalytic action similar to a nano tube. Catalytic action appears to be related to the CHANGE in Casimir force due to changes in geometry such as nature provides inside a skeletal catalyst or the Casimir packing geometry of bulk nano powders. In the relativistic interpretation of catalytic action you have reactions that are accelerated by areas of Casimir geometry in the catalyst causing time dilations that trigger these reactions. In the most energetic catalysts the entire reactants can be dilated inside a cavity but catalytic action also occurs all the way down to at least the molecular level where only portions of an atom or molecule may interact with the Casimir  geometry.

From: Wm. Scott Smith Sent: Thursday, January 27, 2011 6:43 PM
To: vortex-l@eskimo.com
Subject: EXTERNAL: [Vo]:Relativistic-Cavity Twins

Shrinking the time axis is the same thing as augmenting the spacial axes if we
are defining distance as Velocity multiplied by time.  Shrinking the time axis
means that more local time is traversed, requiring more distance.  This is the
reverse of the Relativistic Twins: In this instance, the cavity “Twin”
corresponds to the one that stays on Earth and vice versa!
________________________________
Date: Thu, 27 Jan 2011 17:01:56 -0500
From: francis.x.roa…@lmco.com
Subject: RE: EXTERNAL: [Vo]:Rel Cav’s: Shrink time axis inside Relativistic
Cavities to get correct result!
To: vortex-l@eskimo.com
Scott,
I like your model for the temporal aspect but I was choosing my
words carefully to make my points as  intelligible as possible to the most
common denominator. I was also trying to make the point that there can be a
larger volume of space  inside the cavity then the exterior spatial dimensions
would predict. IMHO Deuterium ice, condensed hydrogen and the myriad  other
names we apply are all unchanged locally but take on these strange appearances
when they occupy this extended space inside a Casimir cavity or the
interstitial space inside a lattice.  I believe that when   vacuum fluctuations
“appear” to get smaller between Casimir plates it is NOT a  simple
displacement of the longer flux being replaced by shorter flux that can fit
between the plates as described in the present popular version of this theory.
In the relativistic interpretation  it is still the same longer flux  which
only appear shorter in a form of Lorentzian contraction. I believe that this
type of contraction reflects direct changes to the time axis where space time
itself is reshaped inside the cavity. Unlike the normal Lorentzian contraction
of a single dimension where you have spatial velocity in a Pythagorean
relationship to the “normal” intersecting rate of the ether, this version of
contraction instead directly changes the intersection rate of this nonphysical
axis by manipulating energy density. Because the axis of
displacement/contraction is now 90 degrees to all 3 spatial axis this type of
contraction should appear  spatially symmetrical and appear to get smaller from
ANY spatial axis instead of the common Lorentzian contraction. The cost of this
type of contraction is borne by nature in segregating energy density between
the outside and inside of a plate cavity system in a manner that skips the need
for near luminal velocity and instead changes time (intersecting rate) directly
proportional to local geometry in different zones inside and outside the cavity.
Regards
Fran

Wm. Scott Smith said on Thursday , January 27, 2011 1:13 PM
I really think a better way to think about Relativistic Cavities is to think of
the time-axis shrinking, relative to the also reduced size of they particle
within the cavity.  Shrinking the time axis, has the effect of accelerating the
velocity of travel along that axis, ie the passage of time.  This approach
explains precisely how the H2 molecule “spends so much time there relative to
us and spends so little time there from an external perspective.

OK its clear to me that You absolutely get it! But I was trying
to avoid the confusion when talking about “velocity” on a nonphysical axis -
the seeming conflicts and arguments I got early on  caused me to write the
thread in the verbose manner that I chose for the benefit of those less
familiar. Once the lights come on and someone understands the relativistic
concept of a shrinking time axis it does make an easier model to visualize.
Your reference to the  reverse Relativistic Twins analogy where the cavity twin
corresponds to the less accelerated twin on earth was spot on because the
cavity twin is negatively accelerated (equivalently)such that the “stationary
twin” outside the cavity appears to be approaching luminal velocity relative to
the negatively accelerated cavity twin inside. My biggest challenge here is to
develop a mathematical relationship between the Casimir formula  and  energy
density that would allow an equivalent acceleration suitable to accumulate into
this new form of “equivalent” Lorentzian contraction. Some of the life after
death scenarios suggest a very slow accumulation to this contraction point
where the scale can then start to contract rapidly and produce these anomalous
forms of mini hydrogen. If I am correct about this rapid form of contraction
then these atoms are able to penetrate down into cavities hundreds of times
smaller than the “spatial” size of the atoms themselves. The relativistic space
time inside these cavities does have the Limits imposed by Liftshitz for how
close these atoms can approach the plates generating the field but in this
scenario that limit is never violated as the atoms continually shrink away from
the walls of the cavitiy  allowing more and more gas to occupy the same spatial
volume without increasing pressure.

[Vo]:E = k f^3 to Ideal Casimir formula

Wm. Scott Smith
Thu, 27 Jan 2011 20:36:41 -0800

E = k f^3 to Ideal Casimir formula

I can't account perfectly for all the changing constants---but this is pretty
close.  See

http://z-pec.yolasite.com/resources/Short%20NSS%20Conference%20Paper.pdf 

The following is a more recent paper on my perspectives on the Q Flux----I have
to locate and Add all the references to support these things---but most of it
is (un)common sense!

http://z-pec.yolasite.com/resources/LPD-SPECIFICATION%20Ammended%2012-22-10.pdf
Print Friendly

Tungsten and Atomic hydrogen

In 2008 I became interested in the claims of Black Light founder, Randel Mills,  regarding a new state of catalyst bound hydrogen he named the hydrino. This was when Rowan Univercity confirmed an anomalous amount of heat energy was being generated by a reactor full of hydrogen and a customized skeletal catalyst called Rayney nickel.  I remain a fence sitter regarding the Mills theory VS  researchers like Arata who also claims anomalous heat released in his Pd nanopowders also based on theoretical forms of  condensed hydrogen such as ”hydrogen clusters” or the isotope “deuterium ice”,  or Naudts “relativistic hydrogen” or the  team of Haisch and Model who also point to a synthetic form of skeletal catalyst based on Casimir effect  that uses hydrogen caught in what they term a “Casimir-Lamb pinch”.  A simple net search reveals the pores in Rayney nickel are of Casimir geometry making the environments of all these researchers essentially the same even though Haisch and Moddel propose a different method of extracting the energy. It was only recently I discovered the work of Lyne and Moller on the atomic furnace and atomic hydrogen generator both based on earlier work of Irving Langmuire . Their work reinfoced my concept of  changes in casimir effect being able to disassociate h2 at a discount – An ashless reversible oscillation back and forth between the atomic and molecular form of hydrogen in a narrow thermal band that uncontrolled leads quickly to thermal runaway or starvation.

The Casimir effect is a physical forces arising from a quantized field. Two uncharged metallic plates placed a few hundred nanometers apart without any external electromagnetic field will develop a force of attraction between themselves. In a classical description, the lack of an external field would mean that there is no field between the plates, and no force would be measured between them. From the perspective of QED,( quantum electrodynamics), however the plates do affect the virtual photons (vacuum fluctuations) which constitute the field, and generate a net attraction between the two plates.
If the plates are free to move the  longer waveforms inside the cavity are supressed reducing energy density relative to outside the cavity and will push the plates together. This force has been measured, and is a striking example of an effect purely due to second quantization. Dutch physicists Hendrik Casimir and Dirk Polder first proposed the existence of the force and formulated an experiment to detect it in 1948 while participating in research at Philips Research Labs. The classic form of the experiment, described above, successfully demonstrated the force to within 15% of the value predicted by the theory. In 2003 this force was measured to within 5% of theory. If the plates are braced apart this force becomes permanent and reduces the energy density btween the plates as compared to outside the plates. This view of  wavelength supression where longer vacuum  wavelengths are opposed inside a cavity of Casimir geometry is still controversial and subject to interpretation.  A 2005 paper by Jan Naudts,  ”On the hydrino state of the relativistic hydrogen atom” [5] , contends that the sub zero energy states of hydrogen like the hydrino, fast hydrogen or fractional hydrogen overlooked relativistic effects inside Casimir cavities.  Relativistic hydrogen in this case may imply equivalent acceleration provided by the Casimir effect, These  lower energy states remain stationary relative to lower energy density that occurs inside a Casimir cavity as the longer wavelength vacuum fluctuations are supressed by the closely spaced plates. The hydrogen is unaware of any translation because IMHO  it is the “canvas” of space-time that  is changing not the matter drawn upon it.  I am proposing Naudt’s relativistic “translation” of hydrogen requires a relativistic interpretation of Casimir effect instead of the more comonly held concept of wavelength “exclusion”.  In the relativistic interpretation the original longer waveforms are not “excluded” but rather still exist between the Casimir plates  merely “translated” to  appear faster from our relativistic perspective outside the plates.  I am also proposing that the lower energy density inside casimir cavities favors atomic hydrogen to translate to different relativistic values while the covalent bond of H2 resists this translation (The atoms need to scale to different inertial frames but the covalent bond opposes this scaling). If these relativistic (fractional) hydrogen atoms form relativistic h2 while translated then this relativistic (fractional)hydrogen molecule will also resist further translation to any new fractional value for the same reason - the covalent bond is now locking the fractional atoms together and opposes any further change in inertial scaling. This provides an asymetrical exploitable path for atomic vs molecular hydrogen into and out of a Casimir cavity and allows the relativistic covalent bond to accumulate energy toward disassociation. If the accumulated energy allows the molecule to be disassociated for less energy than that which is released during molecular formation then thermal runaway can occur.

The Moller Atomic Hydrogen Generator is  based on work by Irving Langmuire in the 1920′s with atomic hydrogen and tungsten electrodes to produce a hydrogen torch.  In the paper  “IRVING LANGMUIR AND ATOMIC HYDROGEN”  http://alturl.com/asihb  Nicholas Moller writes “ Had Langmuir been familiar with ZPE, he would most certainly have reached other conclusions in terms of explaining the extraordinary energy properties of atomic hydrogen. As it was proven by Langmuir, thevolume of the hydrogen when dissociated into atoms increases to the double of the volume of its molecular state. Upon recombination, heat energy is released to the tune of 90.000 cal/gram molecule. When incorporating ZPE in the explanation of the hydrogen process, it could be argued that the hydrogen is not really a fuel but rather a medium, gateway or a super-conductor of ZPE from the vacuum of space, converting ZPE radiation and ultra-high frequency electrical energy into infrared (heat) radiation. On recombination into molecules the ZPE is “squeezed” out, releasing the absorbed energy. “.    The MAHG was largely abandoned in 2005 after exhaustive tests by Jean-Louis Naudin  and collaboration with Moller failed to produce any solid evidence of over unity power. Their testing rested  strongly on a pulse width modulated  frequency delivered to the tungsten electrode sputtered on the inside of a special vacuum tube. They eliminated all oxygen but only  circulated  hydrogen as a function of heating provided by a PWM waveform to  bring the molecules near disassociation levels.  I believe Moller and Lynes’ concept of H2-H1 oscillation  is more correct than the 3 body reactions claimed by Mills in the Black Light Process – I think Mills may be concentrating on the hydrides because they are the only ash available but the heat is coming from the reversible ashless reactions between atomic and molecular hydrogen. The hydrides are poisoning the reaction and reducing the Casimir effect by reacting with the cavity walls during thermal runaway.  My posit, Like Moller and Lyne’s, is that hydrogen can osscilate between h1 and h2 in the presence of a vigorus catalyst or change in Casimir geometry (SAME THING). I propose that disassociation energy is contributed by changes in  Casimir geometry which can take the form of pyrophoric material such as finely divided catalyst metals like Mills’ Rayney Nickel or Aratas’ Pd nano powders.  My posit is that atomic hydrogen can translate freely to different “relativistic” or fractional values but the covalent bond of molecular hydrogen opposes translation to different relativistic values. The Pulsing waveform used to heat-disassociate h2 in the MAHG device can disassociate relativistic h2 at a discount if it occurs while the molecule’s covalent bond is opposing translation to a different Casimir geometry. The PWM scheme that they did adopt is similar to the HV  electrolysis employed by Energetics another research team publishing similar claims based on their prototype device.  The Moller AHG sadly  failed to incorporate the circulation of hydrogen proposed in Lynes atomic Furnace and the prototype proposed in the Haisch – Moddel patent.  The energy required to pump the hydrogen through the catalyst does not account for the anomalous heat energy claimed – these calculations were performed early on by Professor Garret Moddel who patented a system based on Casimir effect with Dr Bernard Haisch in May 2007. Casimir effect is based on the cube of the distance between plates and not a square law like most electrical or gravitational forces. According to  a paper from Dr Carlos Calvet  Evidence for the Existence of 5 Real Spatial Dimensions in Quantum Vacuum” this points to a force displaced 90 degrees from 3D space. It sidesteps the Conservation of Energy and allows these covalent bonds to accumulate the normally unrectifiable chaotic energy behind the random motion of Gas Law. This random motin of gas atoms is based on Heisenburg Uncertainty Principle – a sneaky way to introduce Zero Point energy in a fashion that is accepted by mainstream.

The MAHG project was truly inspired but could have been improved with tungsten powder instead of a sputtered surface to greatly increase the surface area for the hydrogen to migrate through.  I would also design the test to avoid thermal runaway which would immediately melt closed or create whiskers across any geometry exhibiting Casimir force, instead perhaps increase h2 circulation but reduce the PWM to keep the same temp with as little heater energy as possible. Likewise I think Arata’s experiments with hydrogen and Pd powder could benefit from the circulation demonstrated in the MAHG device – The problem being that most clasically trained researchers sees no sense in a closed loop of hydrogen being pumped around and around through the same catalyst.

A Science Daily article from  Sept 28 th 2010 “Nanocatalyst Is a Gas“  reveals that tungsten oxide nano particles with inert zirconia as an insulating support structure can result in a 5 fold increase in catalytic action when you maximize the amount of these nanoparticles on the support structure  without letting them touch. This research was funded to increase the octane in liquid gasoline but one would expect this effect to be stronger in a gas medium where the London Forces between nanoparticles are less obstructed by the widely distributed gas atoms as opposed to tightly bound liquid molecules.   The research reaffirms the fundamental nature of catalytic action to increase with the amount of  seperated surface areas inverse to the seperation space .  a 2009 paper, “Pinpointing catalytic reactions on carbon nanotubes ”, by Peng Chen et all from Cornell Univercity,  researchers discovered that catalytic action only occurs when this nanogeometry CHANGES at the openings and defects of a nanotube. Although packing geometry of nanoparticles can produce strong catalytic action  (change in Casimir force) it seems  that, IMHO,   the rapidity and degree of  change in force due to particle shapes may become more important than just the proximity.  Similar to the smooth unbroken nanotube walls in the Cornell study where no catalytic action can occur the steadily changing geometry of perfectly round nano spheres would actually produce a minimal catalytic force compared to nano particles with rough dynamic surfaces. The very local change in space between nanoparticles with rough surfaces  would be further enhanced by use of insulating materials, zeolites which add and subtract from the dispersion forces and can also alter the packing density of uniform nano particles. IMHO it is these properties of packing geometry shape and density which are reflected in the use and design of real and synthetic skeletal catalysts used by Mills in the Black Light Process, Haisch and Modell in their layered synthetic catalyst. Aratas’ Pd nano particles  and Mollers’  tungsten sputtered electrode in the  atomic hydrogen generator.  Pyrophoric action sometimes occurs when metals are finely divided into nano particles through filing in a ball mill or even leaching out softer metals from a parent alloy like Rayney Nickel. Pyrophoric action is similar to the 5x catalytic action discussed in the Science Daily report except more pronounced and in an oxygen rich environment leads to combustion that eventually destroys the geometry by melting the surface areas together or at least into cat whiskers to reduce the force.  This force does not disappear when you remove oxygen and may even allows you to more finely divide the metal into a more powefull force provided the milling is performed in a glove box and the resulting material stored in a vacum or inert gas. otherwise the material oxidizes and burns itself out destroying the geometry. Catalytic or pyrophoric action contributes to the disassociating force while  natures pushes h1 to combine as h2.  As long as oxygen is not present and the powder does not  lose it’s finely divided property due to heat this process is a wholly reversible chemical path. The pyrophoric action of finely divided metal powders disguises catalytic action, Casimir geometry and the normally unrectifiable chaotic energy behind gas motion (HUP). It does not violate COE but rather provides an exception to the rule that you can not rectify the random motion of gas atoms.

As mentioned previously Naudts  paper,  ”On the hydrino state of the relativistic hydrogen atom“   provided a  possible relativistic  explanation for the hydrino and other condensed forms of hydrogen being proposed by researchers. IMHO it requires  A  relativistic interpretation of Casimir effect  where the supression of wavelengths between two closely spaced plates of a Casimir cavity or pores of a skeletal catalyst actually curves  space-time to make room for the wavelengths making those same wavelengths suddenly appear shorter from our perspective outside the cavity. Below the waveform and tiny observer inside a Casimir cavity appear to get smaller from our perspective but the waveforms and any hydrogen atoms inside the cavity appear unchanged to the tiny observer also inside.

 

The Twin paradox describes time dilation between an earth bound twin and another twin in a rocket ship approaching a high fraction of C but  also holds true for equivalent acceleration where one twin remains stationary in free space while the other endures crushing gravitational acceleration at the bottom of a deep gravity well. This ”eqivalent acceleration” is what I am suggesting occurs inside a Casimir cavity at a nano scale.  Not just the excluded wavelengths but all the EM frequencies inside a cavity appear relativisticly to be up-shifting due to this equivalent acceleration.  The cavity is scrunching up space time -in a ”tail  wagging the dog” scenario where the supression uses these restricted wavelengths like a handle on space time itself- and the se “seemingly condensed”  forms of hydrogen are merely being redrawn on the “scrunched up” surface.  Changes in energy density and time dilation occur for both the equivalent acceleration version of the Twin Paradox and EM supression inside a Casimir cavity (C is said to increase inside a cavity).    In the macro – Twin example observers are relatively stationary to each other but seperated by a slow gravitational gradient that builds with distance/time^2 forming a gravity well.  The observer floating in free space measures the same energy density as the observer at the bottom of the gravity well but space-time has stretched to scale our rulers and rods to keep this measurement the same. time dilation will accumulate slowly at whatever fraction of C the equivalent acceleration/gravity represents. Likewise I am proposing these same forces exist at the nano scale inside a Casimir cavity without the astronomical seperation between inertial frames – this allows us to exploit differences in inertial frames using the covalent bond as a rectifying mechanism where energy can be extracted by asymetrical paths between bonding states and spatial confinement.

Another relativistic view of EM supression is seen  in “Cavity QED” by Zofia Bialynicka-Birula which proposes an abrupt break in isotropy between Casimir plates. This difference in energy density will always appear negative to an observer outside the cavity experiencing the standard energy density in free space.  The abruptness of this EM supression inside a Casimir cavity suggests  equivalent acceleration can occur between 2 observrs seperated by only the thickness of a Casimir cavity wall seperating the inside and outside of  the cavity.  IMHO Casimir plates accumulate a gravity well  at an accelerated rate due to EM supression of longer wavelengths between the plates (like 2 ships parked too close together the  longer waves are restricted creating a difference in pressure outside the ships vs between the ships which pushes them towards each other) if these Casimir plates are braced apart to prevent them from being pushed together a permanent exclusion field occurs.  The excluded wavelengths between the plates mean you have an energy density that is lower than the density outside the plates without the great astronomical seperations needed in a gravity well.  A 1999 paper “The Light Velocity Casimir Effect” by Tom Ostoma and Mike Trushyk  which proposes the Casimir cavity as a  relativistic environment where the velocity of light appears to increase relative to outside the cavity has led me to a relativistic interpretation of Casimir effect where the longer wavelengths outside the cavity still exist inside the cavity but simply  appears shorter to external observers due to time dilation inside the cavity.  Little difference to the external observer but this makes a huge difference to  gas molecules migrating between the inside and outside of the cavity.   I think this is the underlying energy source for many of the anomalous heat claims such as Moller’s Atomic Hydrogen Generator, Mills’ Black Light Process and Arata’s work with nano powders and hydrogen.  You can dispense with the complicated such as Mill’s super chemistry for the hydrino, theories based on condesed forms of hydrogen or even my own  relativistic interpretation of  EM supression resulting in Casimir effect and simply look at this as an oxygen free form of pyrophoric action on the hydrogen bonding state. If the oxygen path is removed the catalytic force can attain higher levels capable of reducing the amount of energy needed to disassociate a molecule to a point lower than the energy released when the atoms reform h2 – a situation that can quickly runaway and destroy itself.

Below is a related summation on ether by JohnEB from the Hydrino Study group followed by my reply
——————————————————————————————————————————

From Hydrino Study Group Ether and the Theory of Relativity by JohnEB  on September 11th, 2010, 9:49 am

Generally, it is thought that Einstein eliminated the ether and did not believe in it. This is not true.
An Address delivered on May 5th, 1920, in the University of Leyden

The following is from the book “SIDELIGHTS ON RELATIVITY” by Albert Einstein:

ETHER AND THE THEORY OF RELATIVITY

How does it come about that alongside of the idea of ponderable matter, which is derived by abstraction from everyday life, the physicists set the idea of the existence of another kind of matter, the ether? The explanation is probably to be sought in those phenomena which have given rise to the theory of action at a distance, and in the properties of light which have led to the undulatory theory. Let us devote a little while to the consideration of these two subjects.

Outside of physics we know nothing of action at a distance. When we try to connect cause and effect in the experiences which natural objects afford us, it seems at first as if there were no other mutual actions than those of imrsa c ;ate contact, e.g. the communication of motion by impact, push and pull, heating or ind.ut;- ing combustion by means of a flame, etc It is true that even in everyday experience weight, which is in a sense action at a distance, plays a very important part. But since in daily experience the weight of bodies meets us as something constant, something not linked to any cause which is variable in time or place, we do not in everyday life speculate as to the cause of gravity, and therefore do not become conscious of its character as action at a distance. It was Newton’s theory of gravitation that first assigned a cause for gravity by interpreting it as action at a distance, proceeding from masses. Newton’s theory is probably the greatest stride ever made in the effort towards the causal nexus of natural phenomena. And yet this theory evoked a lively sense of discomfort among Newton’s contemporaries, because it seemed to be in conflict with the principle springing from the rest of experience, that there can be reciprocal action only through contact, and not through immediate action at a distance.

It is only with reluctance that man’s desire for knowledge endures a dualism of this kind. How was unity to be preserved in his comprehension of the forces of nature ? Either by trying to look upon contact forces as being themselves distant forces which admittedly are observable only at a very small distance—and this was the road which Newton’s followers, who were entirely under the spell of his doctrine, mostly preferred to take ; or by assuming that the Newtonian action at a distance is only apparently immediate action at a distance, but in truth is conveyed by a medium permeating space, whether by movements or by elastic deformation of this medium. Thus the endeavour toward a unified view of the nature of forces leads to the hypothesis of an ether. This hypothesis, to be sure, did not at first bring with it any advance in the theory of gravitation or in physics generally, so that it became customary to treat Newton’s law of force as an axiom not further reducible. But the ether hypothesis was bound always to play some part in physical science, even if at first only a latent part.

When in the first half of the nineteenth century the far-reaching similarity was revealed which subsists between the properties of light and those of elastic waves in ponderable bodies, the ether hypothesis found fresh support. It appeared beyond question that light must be interpreted as a vibratory process in an elastic, inert medium filling up universal space. It also seemed to be a necessary consequence of the fact that light is capable of polarisation that this medium, the ether, must be of the nature of a solid body, because transverse waves are not possible in a fluid, but only in a solid. Thus the physicists were bound to arrive at the theory of the ” quasi-rigid ” luminiferous ether, the parts of which can carry out no movements relatively to one another except the small movements of deformation which correspond to light-waves.

This theory—also called the theory of the stationary luminiferous ether—moreover found a strong support in an experiment which is also of fundamental importance in the special theory of relativity, the experiment of Fizeau, from which one was obliged to infer that the luminiferous ether does not take part in the movements of bodies. The phenomenon of aberration also favoured the theory of the quasi-rigid ether.
The development of the theory of electricity along the path opened up by Maxwell and Lorentz gave the development of our ideas concerning the ether quite a peculiar and unexpected turn. For Maxwell himself the ether indeed still had properties which were purely mechanical, although of a much more complicated kind than the mechanical properties of tangible solid bodies. But neither Maxwell nor his followers succeeded in elaborating a mechanical model for the ether which might furnish a satisfactory mechanical interpretation of Maxwell’s laws of the electro-magnetic field. The laws were clear and simple, the mechanical interpretations clumsy and contradictory. Almost imperceptibly the theoretical physicists adapted themselves to a situation which, from the standpoint of their mechanical programme, was very depressing. They were particularly influenced by the electro-dynamical investigations of Heinrich Hertz. For whereas they previously had required of a conclusive theory that it should content itself with the fundamental concepts which belong exclusively to mechanics (e.g. densities, velocities, deformations, stresses) they gradually accustomed themselves to admitting electric and magnetic force as fundamental concepts side by side with those of mechanics, without requiring a mechanical interpretation for them. Thus the purely mechanical view of nature was gradually abandoned. But this change led to a fundamental dualism which in the long-run was insupportable. A way of escape was now sought in the reverse direction, by reducing the principles of mechanics to those of electricity, and this especially as confidence in the strict validity of the equations of Newton’s mechanics was shaken by the experiments with 13-rays and rapid kathade rays.

This dualism still confronts us in unextenuated form in the theory of Hertz, where matter appears not only as the bearer of velocities, kinetic energy, and mechanical pressures, but also as the bearer of electromagnetic fields. Since such fields also occur in vacuo—i.e. in free ether— the ether also appears as bearer of electromagnetic fields. The ether appears indistinguishable in its functions from ordinary matter. Within matter it takes part in the motion of matter and in empty space it has everywhere a velocity ; so that the ether has a definitely assigned velocity throughout the whole of space. There is no fundamental difference between Hertz’s ether and ponderable matter (which in part subsists in the ether).

The Hertz theory suffered not only from the defect of ascribing to matter and ether, on the one hand mechanical states, and on the other hand electrical states, which do not stand in any conceivable relation to each other ; it was also at variance with the result of Fizeau’s important experiment on the velocity of the propagation of light in moving fluids, and with other established experimental results.

Such was the state of things when H. A. Lorentz entered upon the scene. He brought theory into harmony with experience by means of a wonderful simplification of theoretical principles. He achieved this, the most important advance in the theory of electricity since Maxwell, by taking from ether its mechanical, and from matter its electromagnetic qualities. As in empty space, so too in the interior of material bodies, the ether, and not matter viewed atorlistically, was exclusively the seat of electromagnetic fields. According to Lorentz the elementary particles of matter alone are capable of carrying out movements ; their electromagnetic activity is entirely confined to the carrying of electric charges. Thus Lorentz succeeded in reducing all electromagnetic happenings to Maxwell’s equations for free space.

As to the mechanical nature of the Lorentzian ether, it may be said of it, in a somewhat playful spirit, that immobility is the only mechanical property of which it has not been deprived by H. A. Lorentz. It may be added that the whole change in the conception of the ether which the special theory of relativity brought about, consisted in taking away from the ether its last mechanical quality, namely, its immobility. How this is to be understood will forthwith be expounded.

The space-time theory and the kinematics of the special theory of relativity were modelled on the Maxwell-Lorentz theory of the electromagnetic field. This theory therefore satisfies the conditions of the special theory of relativity, but when viewed from the latter it acquires a novel aspect. For if K be a system of co-ordinates relatively to which the Lorentzian ether is at rest, the Maxwell-Lorentz equations are valid primarily with reference to K. But by the special theory of relativity the same equations without any change of meaning also hold in relation to any new system of co-ordinates K’ which is moving in uniform translation relatively to K. Now comes the anxious question :—Why must Yin the theory distinguish the K system above all K’ systems, which are physically equivalent to it in all respects, by assuming that the ether is at rest relatively to the K system ? For the theoretician such an asymmetry in the theoretical structure, with no corresponding asymmetry in the system of experience, is intolerable. If we assume the ether to be at rest relatively to K, but in motion relatively to K’, the physical equivalence of K and K’ seems to me from the logical standpoint, not indeed downright incorrect, but nevertheless inacceptable.

The next position which it was possible to take up in face of this state of things appeared to be the following. The ether does not exist at all. The electromagnetic fields are not states of a medium, and are not bound down to any bearer, but they are independent realities which are not reducible to anything else, exactly like the atoms of ponderable matter. This conception suggests itself the more readily as, according to Lorentz’s theory, electromagnetic radiation, like ponderable matter, brings impulse and energy with it, and as, according to the special theory of relativity, both matter and radiation are but special forms of distributed energy, ponderable mass losing its isolation and appearing as a special form of energy.

More careful reflection teaches us, however, that the special theory of relativity does not compel us to deny ether. We may assume the existence of an ether ; only we must give up ascribing a definite state of motion to it, i.e. we must by abstraction take from it the last mechanical characteristic which Lorentz had still left it. We shall see later that this point of view, the conceivability of which I shall at once endeavour to make more intelligible by a somewhat halting comparison, is justified by the results of the general theory of relativity.

Think of waves on the surface of water. Here we can describe two entirely different things. Either we may observe how the undulatory surface forming the boundary between water and air alters in the course of time ; or else–with the help of small floats, for instance—we can observe how the position of the separate particles of water alters in the course of time. If the existence of such floats for tracking the motion of the particles of a fluid were a fundamental impossibility in physics—if, in fact, nothing else whatever were observable than the shape of the space occupied by the water as it varies in time, we should have no ground for the assumption that water consists of movable particles. But all the same we could characterise it as a medium.

We have something like this in the electromagnetic field. For we may picture the field to ourselves as consisting of lines of force. If we wish to interpret these lines of force to ourselves as something material in the ordinary sense, we are tempted to interpret the dynamic processes as motions of these lines of force, such that each separate line of force is tracked through the course of time. It is well known, however, that this way of regarding the electromagnetic field leads to contradictions.

Generalising we must say this :—There may be supposed to be extended physical objects to which the idea of motion cannot be applied. They may not be thought of as consisting of particles which allow themselves to be separately tracked through time. In Minkowski’s idiom this is expressed as follows :—Not every extended conformation in the four-dimensional world can be regarded as composed of world-threads. The special theory of relativity forbids us to assume the ether to consist of particles observable through time, but the hypothesis of ether in itself is not in conflict with the special theory of relativity. Only we must be on our guard against ascribing a state of motion to the ether.

Certainly, from the standpoint of the special theory of relativity, the ether hypothesis appears at first to be an empty hypothesis. In the equations of the electromagnetic field there occur, in addition to the densities of the electric charge, only the intensities of the field. The career of electromagnetic processes in vacuo appears to be completely determined by these equations, uninfluenced by other physical quantities. The electromagnetic fields appear as ultimate, irreducible realities, and at first it seems superfluous to postulate a homogeneous, isotropic ether- medium, and to envisage electromagnetic fields as states of this medium.

But on the other hand there is a weighty argument to be adduced in favour of the ether hypothesis. To deny the ether is ultimately to assume that empty space has no physical qualities whatever. The fundamental facts of mechanics do not harmonize with this view. For the mechanical behaviour of a corporeal system hovering freely in empty space depends not only on relative positions (distances) and relative velocities, but also on its state of rotation, which physically may be taken as a characteristic not appertaining to the system in itself. In order to be able to look upon the rotation of the system, at least formally, as something real, Newton objectivises space. Since he classes his absolute space together with real things, for him rotation relative to an absolute space is also something real. Newton might no less well have called his absolute space “Ether ” ; what is essential is merely that besides observable objects, another thing, which is not perceptible, must be looked upon as real, to enable acceleration or rotation to be looked upon as something real.

It is true that Mach tried to avoid having to accept as real something which is not observable by endeavouring to substitute in mechanics a mean acceleration with reference to the totality of the masses in the universe in place of an acceleration with reference to absolute space. But inertial resistance opposed to relative acceleration of distant masses presupposes action at a distance ; and as the modern physicist does not believe that he may accept this action at a distance, he comes back once more, if he follows Mach, to the ether, which has to serve as medium for the effects of inertia. But this conception of the ether to which we are led by Mach’s way of thinking differs essentially from the ether as conceived by Newton, by Fresnel, and by Lorentz. Mach’s ether not only conditions the behaviour of inert masses, but is also conditioned in its state by them.

Mach’s idea finds its full development in the ether of the general theory of relativity. According to this theory the metrical qualities of the continuum of space-time differ in the environment of different points of space-time, and are partly conditioned by the matter existing outside of the territory under consideration. This space-time variability of the reciprocal relations of the standards of space and time, or, perhaps, the recognition of the fact that ” empty space ” in its physical relation is neither homogeneous nor isotropic, compelling us to describe its state by ten functions (the gravitation potentials gµv), has, I think, finally disposed of the view that space is physically empty. But therewith the conception of the ether has again acquired an intelligible content, although this content differs widely from that of the ether of the mechanical undulatory theory of light. The ether of the general theory of relativity is a medium which is itself devoid of all mechanical and kinematical qualities, but helps to determine mechanical (and electromagnetic) events.

What is fundamentally new in the ether of the general theory of relativity as opposed to the ether of Lorentz consists in this, that the state of the former is at every place determined by connections with the matter and the state of the ether in neighbouring places, which are amenable to law in the form of differential equations ; whereas the state of the Lorentzian ether in the absence of electromagnetic fields is conditioned by nothing outside itself, and is everywhere the same. The ether of the general theory of relativity is transmuted conceptually into the ether of Lorentz if we substitute constants for the functions of space which describe the former, disregarding the causes which condition its state. Thus we may also say, I think, that the ether of the general theory of relativity is the outcome of the Lorentzian ether, through relativation.

As to the part which the new ether is to play in the physics of the future we are not yet clear. We know that it determines the metrical relations in the space-time continuum, e.g. the configurative possibilities of solid bodies as well as the gravitational fields ; but we do not know whether it has an essential share in the structure of the electrical elementary particles constituting matter. Nor do we know whether it is only in the proximity of ponderable masses that its structure differs essentially from that of the Lorentzian ether ; whether the geometry of spaces of cosmic extent is approximately Euclidean. But we can assert by reason of the relativistic equations of gravitation that there must be a departure from Euclidean relations, with spaces of cosmic order of magnitude, if there exists a positive mean density, no matter how small, of the matter in the universe. In this case the universe must of necessity be spatially unbounded and of finite magnitude, its magnitude being determined by the value of that mean density.

If we consider the gravitational field and the electromagnetic field from the standpoint of the ether hypothesis, we find a remarkable difference between the two. There can be no space nor any part of space without gravitational potentials ; for these confer upon space its metrical qualities, without which it cannot be imagined at all. The existence of the gravitational field is inseparably bound up with the existence of space. On the other hand a part of space may very well be imagined without an electromagnetic field ; thus in contrast with the gravitational field, the electromagnetic field seems to be only secondarily linked to the ether, the formal nature of the electromagnetic field being as yet in no way determined by that of gravitational ether. From the present state of theory it looks as if the electromagnetic field, as opposed to the gravitational field, rests upon an entirely new formal motif, as though nature might just as well have endowed the gravitational ether with fields of quite another type, for example, with fields of a scalar potential, instead of fields of the electromagnetic type.

Since according to our present conceptions the elementary particles of matter are also, in their essence, nothing else than condensations of the electromagnetic field, our present view of the universe presents two realities which are completely separated from each other conceptually, although connected causally, namely, gravitational ether and electromagnetic field, or—as they might also be called—space and matter.
Of course it would be a great advance if we could succeed in comprehending the gravitational field and the electromagnetic field together as one unified conformation. Then for the first time the epoch of theoretical physics founded by Faraday and Maxwell would reach a satisfactory conclusion. The contrast between ether and matter would fade away, and, through the general theory of relativity, the whole of physics would become a complete system of thought, like geometry, kinematics, and the theory of gravitation. An exceedingly ingenious attempt in this direction has been made by the mathematician H. Weyl; but I do not believe that his theory will hold its ground in relation to reality. Further, in contemplating the immediate future of theoretical physics we ought not unconditionally to reject the possibility that the facts comprised in the quantum theory may set bounds to the field theory beyond which it cannot pass.

Recapitulating, we may say that according to the general theory of relativity space is endowed with physical qualities; in this sense, therefore, there exists an ether. According to the general theory of relativity space without ether is unthinkable ; for in such space there not only would be no propagation of light, but also no possibility of existence for standards of space and time (measuring-rods and clocks), nor therefore any space-time intervals in the physical sense. But this ether may not be thought of as endowed with the quality characteristic of ponderable media, as consisting of parts which may be tracked through time. The idea of motion may not be applied to it.

Post Froarty  in reply to JohnEB on September 11th, 2010, 4:19 pm  UPDATED 10/20/2010

John, Excellent thread, as you stated “Only we must be on our guard against ascribing a state of motion to the ether.” I agree that motion implies a spatial velocity where there is none  but a Neo Lorentzian perspective allows the ether to exist 90 degrees displaced from 3D space just like time.  Like time we can only detect dilation in the ether when measured relativsticly.  This  modified LET also explains why the Michaelson and Moreley experiment failed to detect any spatial bias because a 4th dimensional axis is equally displaced from each spatial axis. Time dilation occurs in a gravitational well and I posit the ether is “stretched” to keep our rods and rulers scaled to the environment.  inhabitants in said “stretched” ether would be unaware of any time dilation regardless of how acute until a relative measurement can be afforded, when for instance, the accelerated Twin in the Twin Paradox returns to the same frame as the unaccelerated twin. Consider 3D space as a spatial plane representing the X axis while this “stationary” Ether exists on the same axis as time on the Y axis.  One can argue whether time is isotropic because at the macro scale it has such a slow changing gradient as you increase velocity or enter a gravitational well and even then you must depend on relative measure to detect any changes. I am positing that at the quantum scale this gradual accumulation of a gravity well can be greatly amplified by EM supression due to Casimir geometry. See  “Cavity QED” by Zofia Bialynicka-Birula which proposes an abrupt break in isotropy between Casimir plates. Like a much larger gravitational mass the exterior of the Casimir plates opposes the intersection of this etheric Y axis with the spatial plane but unlike the macro example of a gravity well a Casimir amplified opposition can also be manipulated into accelerating the intersection rate when a tiny hole occurs to release some of this accumulated opposition into a tiny concentrated stream / venturi (like a small hole in a sail the wind whistles through faster than the ambient wind speed). This may explain why DiFiore et all  were unable to accumulate any gravitational effects in their research using stacked cavities – the pressures are really just segregated outside vs inside and diffused vs concentrated. No asymetrical effects can be exploited using cavities alone and you need migrating gas atoms that have an affinity for one energy density/ pressure vs the other to exploit this segragation of force.
Claims of change in radioactive decay rates when material is diffused in catalytic powders could also be based on this affinity . Most claims are of an appreciably accelerated decay rate but there are also a few claims of a  modest delay in decay rate. This relativistic segregation by a Casimir cavity suggests the delayed decay is due to the weak opposition diffused over the exterior of the cavity and the accelerated decay is due to the lower energy density inside the cavity. The physical path and affinity of different gases to different surface geometries could explain which energy densities have the most effect on a particular radioactive material.
Print Friendly

Combining Mill’s chemistry with Haich-Moddel insulated layers of open catalyst cells

Cold Fusion is an inappropriate term, as accurately described by Steven Krivet in a recent article “ Cold Fusion is Neither” cold or fusion.  He provides  the background history and ongoing research before throwing his support solely behind the Widom Larsen theory (2006). I also believe the Widom Larsen theory has strong merit but not to the exclusion of other theories or a likely combination of processes based on these other theories. Mills has evidence of excess heat based on chemistry, The Haisch - Moddel patent is based on Casimir effect, Pam Mosier-Boss at SPAWAR provides evidence for Low energy nuclear reactions and Jan Naudt’s  proposes a relativistic  hydrogen environment for the hydrino. There is no reason to think these related phenomena are all exclusive and the difficulty in matching data to theory up to this point may be due to contributions and interactions between these different processes. The environment is certainly unique but that does not limit the methods to exploit it.

I would like to see someone take the best of these  methods and combine them. The catalytic environment is clearly the common denominator and only the method by which energy gets rectified that differentiates these researchers. IMHO these competing methods have a synergetic effect on each other and there appears to be  multiple processes occuring during test which  combine in different proportions based on the particular  method employed  by different researchers. Some of these methods are chemical reactions with fractional hydrogen like Mills, Beta decay and ultra low momentum neutrons like Widom – Larsen, LENR like Boss and Arata, or my own take on Naudt’s proposal of the hydrino being relativistic hydrogen- suggesting the collective effect of the atoms in the catalyst bend space time such that the orbits only appear fractional from our perspective. This leads immediately to a relativistic interpretation of Casimir effect and EM supression where longer wavelengths only appear shorter. (see Relativistic interpretation of Casimir effect Expanded).  A relativistic interpretation is supported by a 1996 paper, “Cavity QED” by Zofia Bialynicka-Birula which proposes an abrupt break in isotropy between Casimir plates and a 1999 paper “The Light Velocity Casimir Effect” by Tom Ostoma and Mike Trushyk  which proposes the Casimir cavity as a  relativistic environment where the velocity of light appears to increase relative to outside the cavity.  It is also supported by a paper from Dr Carlos Calvet  Evidence for the Existence of 5 Real Spatial Dimensions in Quantum Vacuum”

The conductive open cell Casmir cavities (synthetic catalyst) described in the (Haisch -Moddel patent) are separated by layers of insulating cells which allow the gas atoms to flow smoothly through to the next layer of Casimir calls. This has great advantage over skeletal catalysts and nano powders in that it forces the gas atoms fully into and out of fractional states by circulating through non catalyst layers. Their proposed prototype  is limited by manufacturing capabilities to 100nm and they propose to use noble gas with Casimir Lamb pinch instead of chemistry to rectify energy which produces less energy but does not require a chemical reaction so may actually occur much more often. Their prototype remains unfinished and their calculations unverified by experimental results but their patent was granted based on Stochiastic Electro Dynamics (SED) a well accepted cousin of QED.

Using Mill’s chemistry in an  H-M like open cell design could allow for better control of the reaction since the gas is constantly circulated into and out of fractional states. This better diffuses the reactions over a greater surface area and discourages thermal runaway. It also allows multiple control parameters such as circulation pressure, mixing with inert gases and backfilling the cells with customized nano powders. If  insulating nano powders are used with Arata type nano powders it may be possible to use open cell Nickel foam instead of building the H-M prototype. Rather than neatly organized cell layers the insulating (Zeolites) nano powders and caltalytic (Ni or Pd) nano powders would form open cells randomly based on how the powders mix – both in the surface geometry of the powder itself and the spacing between the powders to form Casimir geometry or insulating dividers between cavities depending on type of powder. This would be less effective than separated layers but no fabrication cost and allow the  much smaller cell sizes which may be needed to disassociate atomic bonds. (change in Casimir force is inverse to the cube of the plate spacing)

Animation of proposed relativistic method where the h2 is repelled from entering into the casimir the cavity  similar to why h2 can not pass through a PEM filter but h1 translates freely and appears to shrink in size (h/x).  When these h/x atoms form h2/x inside the cavity energy is released and further translation to any different fractional value is opposed by the new covalent bond which grips  these fractional orbitals together at a constant orientation. In a recent paper by Professor Garret Moddel dated 30 October 2009  “Assessment of proposed electromagnetic quantum vacuum energy extraction methods” the exclusion of vacuum fluctuations and resulting change in energy density inside a Casimir cavity is employed to explain anomalous heat gains of gas atoms being pumped through this environment. The energy used to pump the atoms through the cavity is far less than the energy gained but does not violate conservation of energy. A more recent paper by Professor  Moddel “A Demon, a Law, and the Quest for Virtually Free Energy” explains this concept  in laymans terms. The fractional atomic hydrogen (h1/x) is restored from fractional molecular hydrogen (h2/x ) at a discount equal to the opposition of  motion accumulating between the covalent bond of the h2/x and the ”pressure” change in Casimir force is applying on the atomic orbitals to translate to a different fractional value.  This means the h2/x can be disassociated for less energy than is released when 2 atoms fall to a molecular state! .This does not violate COE because the covalent bond shifting between different energy densities allows the normally tiny and cancelling zero pint energy to accumulate as opposition to motion and be rectified by a discount at disassociation time. This energy source is normally considered unharnessable but creating this environment where hydrogen is shuttled between areas with different energy densities appears to offer a chemical method to accumulate this energy. This cycle can continue for as long as the gas atoms remain in an environment of changing fractional states. A totally reversible reaction cycle could continue to oscillate between h2 and h1 fueled by  an environment of changing Casimir force/geometry. As a process disassociated h1/x penetrates into the catalyst while translating freely between fractional states,   fractional h2/x forms and accumulates opposition between further translating  and the covalent bond which is holding the orbitals at a fixed dimension such that they can be disassociated at a discount equal to this opposing force. If you prefer a 3 body reaction as posited in some theories you could consider the casimir fields as a large virtual body or adopt the concept of an ultra low momentum neutron suggested in the Widom-Larsen theory both of which are on a scale the size of the entire cavity or metal cluster and as such are in constant contact with all gas atoms in the cell. Fran

Print Friendly

Relativistic interpretation of Casimir effect

    Casimir effect explains why 2 conductive but uncharged paralell plates are attracted together and it explains stictions forces that causes nano geometry devices to  clump together frustrating  research efforts to design mechanical devices at this scale.  The present theory of Casimir effect is based on longer wavelength vacuum fluctuations which are physically too long to exist between the closely spaced  Casimir plates.  It is presumed the absence of longer wavelengths reduces the total   energy density in this confined volume while outside the plates the energy density remains unchanged. It is this difference in energy density that exerts a pressure to close the plates together. it would at first appear that only shorter wavelengths inside the plates would explain this difference in energy density. [note on left the wavelength betwen the plates] 
 
 A 2005  paper by Jan Naudts on relativistic hydrogen  proposed that the  ”hydrino” with it’s controversial sub zero ground state  is actually ” relativistic hydrogen”. Naudts proposal  leads quickly to a contradiction with the accepted theory of Casimir effect and requires a relativistic interpretation where the longer wavelengths, when confined between casimir plates are NOT eliminated, instead they stretch space time to fit themselves between the plates creating an “equivalently accelerated” inertial frame. In either version of the theory an observer outside the cavity observes only shorter wavelengths inside the cavity but in the relativistic interpretation an observer inside the
cavity would still see the longer wavelengths  but the plates at either end of the cavity would appear to shrink away  into the distance always providing just enough room for the full length waveforms to reside no matter how small the spacing becomes.   Although  the term “relativistic hydrogen” initially imagines hydrogen at high spatial velocity such as hydrogen being ejected from the suns corona and Lorentzian contraction to explain the reduced orbital radius, Naudt’s proposal for the hydrino inside of a skeletal catalyst only makes sense in  terms of “equivalent acceleration”. It is assumed  Naudt’s  proposal applies equally to “fractional hydrogen”, “deuterium ice” and other  terms for condensed hydrogen  associated with researchers claims of anomalous heat production. We propose that the REDUCED  vacuum  energy density caused by Casimir geometry should have a  NEGATIVE  equivalent acceleration associated with it because the  INCREASED  vacuum  energy density   caused by a stellar sized mass causes  POSITIVE equivalent  acceleration we experience as gravity. The relativistic intepertation for Casimir effect is supported because the increased energy density of a stellar mass is also known to slow time – which therefore predicts  that the decreased energy density of  Casimir geometry will accelerate time.  This would cause the frequency of vacum fluctuations inside a Casimir cavity to appear “shorter”or “ upshifted” to an observer outside the cavity such as sugested by   a 1999 paper ” Radiation Pressure approach to  Repulsive  Casimir Force ” by V. Hushwater.   The relativistic interpertation for Casimir effect  is further supported by    A 1999 paper titled  “The Light Velocity Casimir Effect” by Tom Ostoma and Mike Trushyk  where the measured velocity of light appears to increase due to Casimir geometry.     
 [Quote from “The Light Velocity Casimir Effect] Our review of the physics literature has not revealed any previous work on the time delay analysis of photon propagation through the ordinary quantum vacuum or any evidence to contradict our hypothesis of photon vacuum delay, presumably because of the precedent set by Einstein’s postulate of light speed constancy.  
Suppose we can place a tiny observer A and his clocks and rulers (somehow) in between the Casimir plates. We would find for observer A that his measurement of the speed of light is the same as the conventional value! However for an observer B outside the plates in the laboratory frame, his measurement does show an increase in light velocity through the plates. Furthermore, the individual space and time measurements ‘dlab’ and ‘tlab’ made by observer B in the laboratory frame do not agree with the same measurements of ‘dplate’ and ‘tplate’ made by our tiny observer A inside the Casimir plates. The general relativists could argue that the 4D space-time inside the Casimir plates is altered compared to outside, and that the light velocity is still an absolute constant in all cases! This argument results because of the crucial importance of light propagation to the fundamental nature of space and time measurements, a theme that was first championed by Einstein. This same controversy rears it’s ugly head in gravity where we are forced to choose between the two experimentally indistinguishable views; 4D curved space-time in general relativity and variable light velocity proposal of EMQG. It turns out to be impossible to distinguish between curved 4D space-time in gravitational frames, and variations in light velocity in gravitational frames experimentally [ End Quote] 

           

   In a relativistic interpretation, Casimir Cavities  like the 10 nm pores  in the skeletal catalysts used by Black Light Power, the 100nm cavities proposed in the Haisch-Moddel prototype or  the geometry formed between grains of nickel nano powders used by the Rossi e-cat are all used to REDUCE  vacuum energy density.     We  know that energy density is the sum of all vacuum fluctuation wavelengths and that even in deep open space without mass there still remains an energy density background.  These flux (aka virtual particles) aren’t hanging around but rather are streaming through our spatial axis at a rate represented by energy density (what Puthoff calls pressure) and when they meet a conductive boundary in Casimir geometry it reduces their ability to stream. As it turns out this “streaming” rate can even be manipulated below zero to negative values! Now it doesn’t matter if you accept my relativistic interpretation of Casimir theory where longer wavelengths only appear shorter inside an accelerated inertial frame due to the suppression or the standard fare that the longer wavelengths being displaced to lower the energy density, The point is that if the opening between Casimir boundaries is small enough you end up with a permanent  stream between the higher energy density outside the boundary and lower densities in the interior. It isn’t the different energy densities  but rather the streams between these zones that represent a “negative pressure”  less than the background levels that the Casimir boundaries are supressing and even less than zero, like the wind speed through a small hole in a sail it can be many times faster than even the ambient wind filling the sail.

Suppression is much easier and more  direct than time dilation and relativistic contraction caused by spatial acceleration where a particle must be accelerated to near luminal velocity before it can start to exhibit Lorentzian contraction in a Pythagorean relationship between its own velocity and C.  IMHO Supression of vacum energy density directly modifies the inertial frames inside the cavity in a “tail wagging the dog” sort of scenario such that Space-Time itself is forced to reshape (upshift) its own wavelengths to fit in the volume provided. This is perceived relativisticly by us outside the cavity as equivalent acceleration acting on any matter occupying the supressed volume and results in similar Lorentzian contraction and time dilation. The contraction however appears symetrical to us outside the cavity because the displacement is 90 degrees from our spatial axis on what we perceive as the time axis.  The Calvet paper also makes the case for this relativistic interpretation of Casimir effect.   There is no need for near luminal velocity of  the gas atoms on the spatial axis inside the cavity.  There is no Pythagorean relationship needed to derive Gamma under these conditions because the cavity is directly manipulating the time axis experienced by gas atoms inside the cavity.                    

 The theoreticl papers mentioned earlier “The Light Velocity Casimir Effect” and “Cavity QED” , and the math papers by Jan Naudts and Ron Bourgoin which indicate that the hydrino state is actually just relativistic hydrogen make a case for the relativistic interpretation of Casimir effect.   Numerous papers have been published on anomalous heat generated by reactions between atomic gases and catalysts or nano powders. The reactions remain the subject of intense research and controversy spread across several fields of research. LENR, cold fusion, solid state systems used by Arata in Japan or Mills at Black Light Power. Most of these researchers report unusual states of matter such as Fractional hydrogen, hydrino, deuterium clusters or ultra dense deuterium. Recent US government reports  conclude the anomalous heat is undeniable and further research is warranted regardless if this is a nuclear or another as yet unidentified energy source.  Although The Haisch Moddel patent  mentions Casimir cavities most papers only mention catalytic materials, a little research however reveals the  pores in the skeletal catalysts used by Black Light Power or the spacing between the Pd nano powders used by Arata are of Casimir geometry. Another suggestion of a relationship between catalytic action and change in Casimir force is from a recent report by Peng Chen at Cornell that catalytic action as measured with an ATM only occurs at the openings and defects in a nanotubes which otherwise have very constant geometry.                  

Below is a basic description of Reifenschweiler effect from the website of Ludwik Kowalski; which again strongly supports relativistic effects due to supression                 

Ludwik Kowalski; 11/xx/2006 Department of Mathematical Sciences Montclair State University, Upper Montclair, NJ, 07043
About two months ago Albert Alberts, from Netherlands, mentioned some observations made by Otto Reifenschweiler. This was on the restricted Internet list for CMNS researchers. Asked for a clarification, Alberts wrote:
    
              

 “The ‘Reifenschweiler effect’ is the observation that the beta-decay of tritium half-life 12.5 years is delayed reversibly by about 25-30% when the isotope is absorbed in 15 nm titanium-clusters in a temperature window in between 160-275 C. Remarkably at 360 C the original radioactivity reappears. The effect is absent in bulk metal. Discovered around 1960/1962 at Philips Research Eindhoven, The Netherlands Reifenschweiler extensively discussed his observation with o.a Casimir (the director of research at the time), Kistemaker (ultracentrifuge expert), and although no satisfactory explanation was found, R. was allowed to publish it. At the time a unique example as to how an electronic environment might affect nuclear phenomena.”                   

 In a private e-mail message Alberts, who used to be a physics teacher, wrote: “I don’t know if that work was replicated, he was invited to, I think, Sandia and later to Los Alamos to demonstrate the effect, instigated by a fellow named Cox. What I do know is that it was replicated in the Philips labs many times, supervised by the eminent Casimir at the time. The beta-rays were detected by Geiger-Mueller counters, at the time Philips had the most advanced evaporation/evacuation techniques possible. Even electron microscopy. The work was criticized by a German fellow, but Reifenschweiler retaliated. That stuff should be in his reprints.” He also wrote that he is in contact with Dr. Reifenschweiler (who is quite old) and that he has some old manuscripts. Subsequently I asked Alberts to compose an essay on Reifenschweiler effect. He agreed. His essay will be shown below as soon as it arrives. I think Reifenschweiler himself will assist in writing a good summary. Meanwhile let me mention that a French researcher, Fabrice David, also summarized Reifenschweiler effect in 2004. That was the topic of his presentation at ICCF11 (11th International Conference on Cold Fusion) in Marseilles                      

The Reifenschweiler effect described by Otto Reifenschweiler in his paper ”Cold Fusion and Decrease of Tritium Radioactivity” describes a small delay in the half life of tritium in contact with titanium powder while a patent by Heinrich Hora “Low Cost elimination of Long-Lived Nuclear waste” describes a large acceleration in radioactive half life of radioactive materials in a catalytic environment. This seems consistent with the segregation of time dilations  in a relativistic interpretation of Casimir effect.  The geometry of different Casimir materials may favor or disfavor the loading of gas atoms into the cavity vs outside the cavity. Those cases where the exterior of the cavity is favored could explain the claims of  anomalous cooling and Reifenschweiler effect.   IMHO you have a dispersed accumulation of pressure on the exterior surfaces of the cavity plates forming a reservoir that only slightly slows time while  feeding a very fast permanent stream through the tiny defect or hole into the cavity between the plates which greatly accelerates time (think venturi) for any gas atoms inside the narrow cavity. Energy suppression due to Casimir geometry results in a pseudo density/gravity of the plate material (Casimir plates are able to accumulate gravity/ oppose vacuum energy at an accelerated rate on their exteriors compared to normal mass because of an insulating effect afforded by the suppression on their interior side). Reports of anomalous cooling could also be related to variations in the type of atomic gas  catalyst and test conditions which could vary the balance between gas populations loading into the cavity vs the reservoir.  I would expect any reports of  anomalous cooling to be a much smaller than reports of anomalous heat for the same reasons reported delays of radioactive  half lives are much smaller than reported claims of accelerated half lives (only a 25-30% delay is mentioned in the Reifenschweiler effect).    

 In Physics clocks in different inertial frames always appear slower to the remote observer regardless of which frame happens to be more accelerated or which frame the remote observer happens to occupy similar to the way an object always appears smaller based on absolute displacement from the observer regardless of which direction the displacement occurs (deriving Gamma). The Beta decay / particle emission rate corresponds directly to the photon bouncing between the mirrors in the classic accelerated spaceship vs the stationary observer used to illustrate the derivation of gamma (time dilation factor) even though the relativistic environment in the Casimir effect is created from equivalent velocity instead of  spatial velocity.  Changes in Beta decay correspond to time dilation and can be in either direction depending on whether the gas particles are inside the fast moving cavity or in the exterior resivoir accumulating outside the cavity. IMHO the multiplying factor for extended half lives (delayed decay) should be much smaller than the multiplying factor for reduced half lives (accelerated decay)  because time inside a Casimir cavity is greatly accelerated trying to deplete a large distributed resivoir in a very small area while outside the cavity time is only slightly delayed by a pseudo density over a very large surface area similar to the sail of a ship – the large surface area accumulates a “pressure” but each area of the sail only contributes a negligible amount of this pressure to the tiny hole in the sail forming a venturi. If the hole is small enough you form a permanent vortex that can’t deplete the sail. 

from article on STARDRIVE On Mar 2, 2010, at 12:16 PM, Bernard Haisch wrote:  A thought experiment clarifying the Haisch-Moddel patent (7,379,286) concept Imagine a monatomic hydrogen gas exposed to Lyman-alpha radiation at 121.5 nm which excites the electron into the n=2 level. Now let some of the gas enter a pipe which blocks the radiation. The hydrogen electron will drop back to the ground state, n=1. We can certainly capture the emitted radiation in the pipe. On exiting the pipe the hydrogen is again exposed to Lyman-alpha radiation and the electron is excited into the n=2 level again.

The process is easily done but not useful because we are simply capturing some of the energy we put there in creating the Lyman-alpha radiation. However this clearly shows that there is no correlation between the electron energy levels and any kind of potential energy relevant to motion into and out of the pipe. The excitation and de-excitation do not produce any forces pulling the hydrogen into or out of the pipe. They are independent processes.

Substitute zero-point radiation for Lyman-alpha and a Casimir cavity for the pipe and assume that because of the Casimir suppression of zero-point radiation there is a temporary reduction in the ground state of the atomic electron (as shown by Puthoff and by Cole) while in the cavity and you have the proposed patent. (Note that this does not produce any so-called stable hydrinos.)”

Bernard Haisch  (also see  Brilliant Disguise: Light, Matter and the Zero-Point Field )

This thought experiment above by Bernard Haisch elicited the thread below on Vortex-l with my subsequent
comments included.
Francis X Roarty

[Vo]:An alternative to LENR
On Fri Fri, 25 Jun 2010 14:42 Jones Beene said:
Can the Arata-type experiment (in general) be explained solely by a Lamb
shift modality of the type that Haisch claims – in his patent?
 I would not go so far as to suggest “solely” but it certainly could be a contributor. The Haisch – Moddel prototype should work with or without noble gas but still requires monatomic atoms in order to translate to these exploitable states, this means the h2 or d2 in an Arata – type experiment would need to be disassociated while the noble gases used in the H-M patent should work at room temperature being inherently monatomic – this further supports my contention that it is the diatomic bond that is opposing the translation of the orbitals constituting the diatom because the noble gases in the H-M patent are much larger than hydrogen but are presumed to translate unopposed. I remain on the fence regarding the pinch mechanism itself which is beyond my skill set but agree if correct it is a far better way to exploit the cavity environment then the chemical reactions suggested by Mills or even my own relativistic ash less oscillating reaction between h1 and h2 states due to changes in Casimir geometry opposing diatomic motion.

If so, we would be suggesting that any helium seen (it is often seen) was
already present in the active material, probably as contamination from
extended ball milling in air, and that this helium had survived bake-out,
which is not an unreasonable assumption since tIhere is so little of it.

 I would not rule out a small amount of fusion to account for the helium as a result of the energy released by the H-M, Mills or other ZPE methods.

In 1947 Willis Lamb carried out an experiment using microwaves to stimulate
RF transitions between orbital levels of hydrogen. There was an anomaly and
the energy difference found was a rise of about 1 GHz for one orbital
compared to the other. This energy is supplied (or detracted) by the quantum
vacuum, but there is normally no net gain or loss.
This particular difference is a looping effect of QED – quantum
electrodynamics, and can be interpreted as the influence of virtual photons
from the ZPE which have been emitted and re-absorbed by the atom. In QED the
electromagnetic field is quantized but its lowest state is NOT zero. Thus,
there exist small zero-point oscillations that cause electrons to execute
rapid oscillatory motions known by the lovely German word: zitterbewegung;
but normally these vibrations reach thermal equilibrium in an ambient range
near 300 Kelvin – and are vibrating in the terahertz range, all of which is
conservative, but ..
The value of the Lamb shift has a tiny mass-energy equivalent, which is
about 4^-6 eV = 1 GHz = 4^-23 joules (correct me if I got this wrong) which
is not much to get excited about; and on top of that: the ups and downs
usually cancel each other out . but if your Casimir cavity is an oscillator
in the 10s of terahertz (slightly above ambient) and you make a particular
nanopowder in the form known as “quantum dots”, such that there is a range
of coherency which can be reached with a thermal trigger, then the gain can
(arguably) be made additive and sequential: well, that would be the
underlying hypothesis for the Haisch claim, and the non-nuclear gain via ZPE
via the Lamb shift as the pumping mechanism.
 Addative and sequential energy gain suggests a finite value but in a relativistic environment where Time dilation comes into play becomes considerable.

There could be LENR activity as well, in the same experiment – which is in
addition to this; but for the time being, let’s stick with the goal of
looking for a justifiable way to explain net energy gain (or loss) without
any nuclear reactions. Can it be found?
Probably. It should also be mentioned that in a slightly different geometry
of nanoparticle, there could be a cooling effect, instead of a heating
effect, which can also be derived from additive and sequential Lamb shifts
(with coherent asymmetry) – which will have the net result to take the host
material below ambient in temperature. This would be the key to
falsifiability – an occasional net cooling effect, based on geometry and
coherence.
This corresponds to the well-known Casimir repulsive effect (as opposed to
the normal Casimir attractive force). There can be this asymmetry (plus or
minus), within narrow geometric ranges, and when coherence is reached, the
result can be net heating, or net cooling (or neither or both if the
material is sloppily prepared).

 The Reifenschweiler effect described by Otto Reifenschweiler in his paper “Cold Fusion and Decrease of Tritium Radioactivity” describes a small delay in the half life of tritium in contact with titanium powder while a patent by Heinrich Hora “Low Cost elimination of Long-Lived Nuclear waste” describes a large acceleration in radioactive half life of radioactive materials in a catalytic environment. This seems consistent with the segregation of time dilations in a Casimir system, you have an accumulation of pressure outside the cavity forming a reservoir that slows time for any gas atoms occupying this area while also supplying a permanent focused stream into the tiny mouth of the cavity which greatly accelerates time for gas atoms inside the cavity. The geometry of different Casimir materials may favor or disfavor the loading of these gas atoms into the cavity vs outside the cavity in the reservoir. energy suppression due to Casimir geometry causes a decrease in vacuum energy inside the cavity, this decrease is concentrated inside the cavity to balance an equal but distributed reservoir of energy outside the cavity (Casimir plates are able to accumulate vacuum energy at an accelerated rate compared to normal mass) . Reports of anomalous cooling could be related to the type of atomic gas and catalyst under test where conditions could vary the balance between gas populations loading into the cavity vs the reservoir, I would expect any reports of cooling to be a much smaller anomaly than excess heat just like delays of half lives are much smaller than claims of accelerated half lives. The interface between the cavity and gas populations is far more efficient and concentrated while the interface to the reservoir is diffused over the outer plate area and may be less inviting (repel?) to the gas populations. 

It can be deduced roughly that to get to one joule per unit volume of active
material in gain(loss), there must be at least about 10^10 sites (which are
active Casimir cavities in vibrational coherence per that same volume). In
the context of an Arata-type experiment there would be about 5000 joules of
excess heat, spread out over about 800 minutes, which on first glance could
be consistent with Lamb shift heating via Casimir cavities if there was a
few cc of active powder present, which was optimized for cavities.
However, the best reason to consider the Lamb shift as an alternative
hypothesis to LENR is IF:
1) No transmutation products or ash are found, other than helium, which
can be explained as non-nuclear contamination
2) No gamma radiation is seen during or immediately after the run, and
no neutrons
3) On occasion, there is a cooling effect instead of a heating effect,
or during the same run there is both a heating effect followed by a cooling
effect, both of which are statistically valid.

Print Friendly

Oppenheimer-Phillips effect predicts fusion and beta decay Ni + d1

A relativistic interpretation of Casimir effect represents an enabling step for the numerous claims of excess heat in LENR. It provides the energy required by other theories to produce nuclear energy or ash less chemistry. One very plausible hypothesis for this 2nd step  was recently presented by Jones Beene on the Vortex mailing list and is shown below. It only pertains to systems using deuterium and nickel and represents only one path of a possible multi path system to account for the excess heat.

From: Jones Beene
Sent: Friday, June 11, 2010 12:15 PM
To: vortex-l@eskimo.com
Subject: [Vo]:Nickel O-P fusion and beta decay

The following is a continuation of a formative hypothesis for the excess energy release in one category of LENR involving nickel as the active host; and in particular the Arata-Zhang results and numerous replications. The key insight is the Oppenheimer-Phillips effect, operating within the confines of a Casimir cavity on a specific isotope of nickel.

Arata and Zhang demonstrated, in a remarkable low-powered (unpowered) experiment, a stronger excess heat effect in nickel than in palladium; but an alloy of nickel with about 15% Pd seems to be optimum. The key to his success is probably related to nanostructure – but it highlights the fact that nickel is likely to be the better choice for the host matrix in any kind of LENR, especially when alloyed, and for the reasons independent of geometry, to be outlined below.

The logic of that observation is that an essentially unpowered experiment, which has been reproduced by at least six groups to date (two yet to be published) must imply that when power is added, the gain will be multiplied. This obvious “next step” is underway in a few labs and in particular the Rossi energy amplifier, which has been rumored to be successful.

The further hope is that a combination of nanostructure, Casimir cavity optimization, outside energy input and direct energy conversion can be anticipated to push the results of a hybrid reactor closer to the level of what will be required for the long-awaited commercial application … even if that first product only involves mundane space heating. In any event, this is a wide open area of research due to the range of prior art, overlap with Mills’ hydrino theory, which is non-nuclear, and expired patents.

In a prior version of this hypothesis there was an incorrect focus on so-called “halo nuclei” which are nuclei having excess neutrons, teetering on the edge of nuclear stability. As it turns out, there is no need to invoke this modality. The well-known Oppenheimer-Phillips (O-P) effect will suffice to explain most of the experimental results, especially when it is considered to operate with an appropriate acceleration cavity – or with relativistic (time distortion) effects.

Stated simply, acceleration of any kind can increases between Casimir plates or walls because the vacuum energy-density is lower inside than outside the cavity. A “dissolved” deuteron which is exiting from a nickel matrix into a cavity experiences a strong venturi effect, and the rate of acceleration itself then increases to the extent necessary to push the deuteron into the inner shell of a nickel “target”, located on the opposite wall – from whence electron shell a “slingshot” effect can electrostatically push the deuteron close to the nucleus, overcoming Coulomb repulsion with the help of O-P shielding.

The first relevant fact is that over two-thirds of natural nickel is the isotope 58Ni, which has very high nuclear stability – but there is also a ~1% isotope: 64Ni which is 6 a.m.u. or ~11% heavier. This is the highest percentage of excess neutrons (compared to the most stable isotope) for any transition metal in the Periodic Table; but that fact alone does not imply metastability, such as in the case of true halo nuclei. From there on, “facts” fade and the explanation offered is to a large part contingent on how well it explains experimental results.

If we look into the precise mechanics of the Oppenheimer-Phillips effect, it is clear that it might not explain actual experimental results with 58Ni or 60Ni the majority isotopes – but that it does work with 64Ni as the target. The larger issue then resolves to: is there a mechanism that favors the anomalously “heavy nickel” isotope, in promoting this effect ? Whether or not there is anything special about the extra level of neutrons, such as a presumed near-field shielding of positive nuclear charge is unknown. There is some logic but no proof that a partially shielded near-field, as would be seen by an approaching deuteron in the range of angstroms, is beneficial for the O-P effect only with that isotope; or that excess neutrons do provide that close shielding which statistically favors the O-P effect for 64Ni, as opposed to the other isotopes which are less shielded.

The Oppenheimer–Phillips process, or “stripping reaction”, is a type of deuteron-induced nuclear reaction which depends on charge shielding of another kind. In this process, the neutron component of an approaching deuteron fuses with a target nucleus, transmuting the target to a heavier isotope, while ejecting the proton. An example, discovered over 85 years ago, is the nuclear transmutation of carbon-12  to carbon-13 at lower than expected energy.

The semantic distinction should be made that this is a fusion reaction, followed by beta day of the heavier nucleus. The fusion is between deuterium and nickel. The ash is a immediate proton, and eventually a beta particle and a transmuted element (to copper in the case of 65Ni). Gamma radiation, even if secondary, should be apparent. The mechanics of interaction allow a nuclear fusion interaction to take place at lower energies than would be expected from a calculation of the Coulomb barrier between a deuteron and a target nucleus.

This is because – as a deuteron approaches the positively charged target nucleus, it experiences a charge polarization where the “proton-end” faces away from the target and the “neutron-end” faces towards the target. The deuteron must be accelerated of course, but the rate of acceleration, being a function of time, is expected to be influenced by time distortion within a Casimir cavity. In this hypothesis, the Casimir cavity of 2-10 nm is a sine qua non for success. The fusion proceeds when the binding energy of the approaching neutron and the target nucleus exceeds the binding energy of the deuteron and its trailing proton. This is a QM reaction which may be statistically altered due to time distortion. The split proton is then repelled from the new heavier nucleus. This is one indicia of the reaction – hydrogen in place of deuterium which will show up in an assay of gases at the end.

Putting this reaction into the context of nickel: with the 58Ni, the O-P effect would give 59Ni as the activated nucleus – but this has a very long half-lie – thousands of years so that does not help us very much. However, with 64Ni you get 65Ni as the activated nucleus and it has a 2.5 hr half life and decays to copper. This is the range half-life that can explain “heat after death” and also the delay in heat buildup over time, and also a transmutation product which has been witnessed in prior LENR results.

This hypotheses should be falsifiable in several ways. Among them is that the copper isotope which is the transmutation product is the lesser of copper’s two isotopes, and that would be an excellent indicator. There should be a small direct gamma signature, and beta electrons will leave a predictable spectrum of bremsstrahlung radiation that should be detected, and there should be hydrogen ash in the deuterium gas after a run which is commensurate with the excess energy seen. All of these expected indicia give hope that the O-P/Casimir hypothesis will either be confirmed or falsified soon.

Jones

Print Friendly

Evidence for Relativistic interpretation of Casimir effect

Numerous papers have been published on anomalous heat generated by reactions between atomic gases and catalysts or nano powders. The reactions remain the subject of intense research and controversey spread across several fields of research. LENR, cold fusion, solid state systems used by Arata in Japan or Mills at Black Light Power. Most of these researchers report unushual states of matter such as Fractional hydrogen, hydrino, deuterium clusters or ultradense deuterium. Recent government reports conclude the anomalous heat is undeniable and further research is warranted regardless if this is a nuclear or another as yet unidentified energy source. Although The Haisch Moddel patent mentions Casimir cavities most papers only mention catalytic materials, a little research however reveals the Casimir geometry of the pores in the skeletal catalysts used by Black Light Power or the spacing between the Pd nano powders used by Arata. Even the permitivity of collapsing menisci in bubble fusion must take on Casimir geometry – assuming a conductive electrolyte. Based on papers describing relativistic states of hydrogen and Cavity QED I am proposing a relativistic interpretation of Casimir effect that also happens to fit results observed in the Reifenschweiler effect.
“The ‘Reifenschweiler effect’ is the observation that the beta-decay of tritium half-life 12.5 years is delayed reversibly by about 25-30% when the isotope is absorbed in 15 nm titanium-clusters in a temperature window in between 160-275 C. Remarkably at 360 C the original radioactivity reappears. The effect is absent in bulk metal. Discovered around 1960/1962 at Philips Research Eindhoven, The Netherlands Reifenschweiler extensively discussed his observation with o.a Casimir (the director of research at the time), Kistemaker (ultracentrifuge expert), and although no satisfactory explanation was found, R. was allowed to publish it. At the time a unique example as to how an electronic environment might affect nuclear phenomena.”

I am not suggesting that nuclear decay is in anyway necessary for anomalous heat but rather that nuclear decay can be utilized like dye in the water to uncover the relativistic effects induced by Casimir cavities.

Other evidence for relativistic effects on radioactive half lifes are listed by Rex research. I ignore Gamma decay as related to excess heat since we have so few dead researchers but some He-4/Alpha decay has been reported (although not near enough to account for the heat) and I am also focused on Beta decay but as a source of detection since I assume the excess heat anomaly will work at least as well with tritium as deuterium so the heat anomally could be compared to the half life delay. The Reifenschweiler effect is not presently associated with excess heat but the 15nm titanium clusters loaded with tritium in the experiment indicate conditions very similar to Rayney nickel loaded with hydrogen in the Black Light Process. If the relativistic interpretation of Casimir effect is correct, I would predict a correlation between The two effects – If tritium were used instead of hydrogen in the Black Light Process the half life delay should be in constant proportion to the anomalous heat.

Note, I still feel fusion is a side effect or result of an interim ashless chemistry/oscillation between h1 & h2. I believe
the change in Casimir force changes the relativistic environment changing the inertial frames and breaking covalent bonds so the atomic orbitals can translate to new fractional states, rebond – dropping to a lower state and releasing the energy the change in Casimir effect just reimbursed them.

Print Friendly

Differences between Haisch – Moddel energy extraction patent and Black Light Power method

I had been following the work of Randell Mills for years. His company, Black Light Power, in nearby Cranburry NJ has been claiming a new form of chemistry based on a new state of hydrogen inside a catalyst. When the news of a confirmation of excess heat by Rowan University occured in the Fall of 2008 I immediately looked up the pore size of their skeletal catalyst Rayney nickel to see if it possibly met Casimir geometry. The pore sizes overlap the most active range for Casimir effect below 10 nm. This is in a range where stiction normally occurs making nano materials clump together and may play a roll when molten metals congeal or grow whiskers to alleviate this Casimir force.

This led me to develop an alternative theory for Casimir effect based on Naudts theory of relativistic hydrogen and Puthoff’s atomic model where vacuum fluctuations apply a counter pressure that opposes the decay of atomic orbitals. I extended Naudts suggestion of a relativistic solution for the fractional orbits reported by Mills, Miley and Arata under differnt monkiers – hydrino, deuterium clusters or inverted Rydberg. I propose that the anomalous heat associated with each of these researchers is due to an asymetrical translation of atomic vs diatomic gas entering and exiting these relativistic fields. A relativistic interpretation of Casimir effect produces gradients of inertial frames by reshaping vacuum fluctuations in space-time to appear shorter and fit between the Casimir boundaries, plates or cavities, in proportion to the sum of local geometry. The effect is known to dissipate upon nearfield proximity to the bounding walls so must start to sum at some minimal distance where changes in local geometry will cause the most abrupt changes in Casimir force and presumably the greatest catalytic action (smooth walled CNTs only exhibit catalytic action at openings and defects). My premise is that monatoms freely translate between these inertial frames but diatoms by nature of their bonds oppose this translation / reshaping of orbitals, effectively rectifying energy from normally chaotic motion according to gas law (based on uncertainty principle)to help disassociate fractional diatoms. This is also seen in the action of Pd membranes or PEM filters that prevent h2 from passing but allow protons to pass. If the protons reform h2 inside a similar structure where defects allow the formation then there will be opposition to further motion where the diatomic bond opposes any further reshaping of the atomic orbitals it is holding together. When the energy source pushing these molecules through the membrane is removed we hear these reports of “Life after death” where anomalous heat continues to be produced for hours and even days beyond power removal. I suggest gas law still provides the motion/energy to disassociate diatoms based on thermal distribution. Some small population of atoms will still be approaching disassociation temperature and be effectively “prearmed” to disassociate when changes in the local Casimir geometry/force exceeds the force exerted by a fractional diatomic bond in opposition to the force of gas law trying to randomly push it into a nearby but different inertial frame. These opposing forces break the diatomic bond and restores the fractional atoms to a fractional value appropriate for the new inertial frame. These atoms are now ready to reform a molecule and repeat the cycle between fractional h1 and fractional h2 as this accumulated population/cluster of fractional h2 slowly “melts” out of the cavity fractional states in a process reverse to when heat or pressure forced h1 deep into its moste fractional regions.

In early 2009 I discovered the patent by Haisch and Modell dated May 2008 which already cited Casimir effect as a prerequisite for a method of extracting energy from noble gases. This meant I was a day late and a dollar short regaring the role of Casimir effect and only my relativistic interpretation of Casimir effect remains a unique theory. The Haisch and Moddel patent was based on manufactured Casimir cavities in stacks of copper plates similar to the pores in the skeletal catalysts used by Mills but separated by insulating layers to maximize the orbital translations between plates. Their theory differs greatly from Black Light Power in that they do not require any chemical reactions. I mistakenly compared their extraction method ,which Dr Haisch coined “Casimir – Lamb Shift” to the Black Light Process in previous blogs but this was resolved in a recent reply to a Huffington Post article “ Sorry, it’s Malignant: Why Scientists Need a New Approach on Climate Change” when Professor Moddel stated “ Some bloggers have linked our patent to Blacklight Power’s hydrino. I cannot comment on whether the concept of a hydrino is valid, but the physics behind it is certainly different from the physics that supports our concept”. He also cited a paper he published in October 09 Assessment of proposed electromagnetic quantum vacuum energy extraction methods which very clearly defined for me the “Casimir Lamb shift”. According to this paper The Casimir – Lamb shift can extract energy from a single atom which releases energy locally to the cavity but then is restored globally by ZPE when it exits the cavity. It does not rely on any collisions or chemistry to occur while inside the cavity as I had wrongly presumed, it is a totally quantum effect. The Black Light Process meanwhile rejects any quantum contributions and is based solely on multibody collisions. My theory is more similar to that of Haisch and Modell which is based based on the Puthoff atomic model but also embraces the need for chemical reactions similar to the Black Light process and presumably the Miley and Arata methods employing Pd membranes in their design.

The different methods and materials used are all based on atomic gas and Casimir geometry . If there really are multiple ways to extract energy from this same environment then the data obtained should contain evidence of summing. The Haisch -Moddel patent describes energy derived from quantum forces without chemical reactions while BLP’s method is solely chemical and refuses to consider any quantum contributions like Casimir effect. My own solution combines them both where molecules formed from these shifted or fractional state atoms allow for ash less chemistry. The diatomic bond opposes further changes in these fractional states but Gas law forces the diatom to move. This changes the local Casimir force and disassociates the diatom so the atoms can translate to the new appropriate fractional value. This frees them to repeat the cycle for as long as they remain fractional.

Print Friendly